1. Thank you to all those who submitted to the Federal Inquiry into E-Cigarettes for making your story count in the fight to legalise nicotine in Australia. Submissions may be viewed HERE.
    Dismiss Notice

Daily New on 3fvape.com

Discussion in '3FVape' started by 3FVAPE, Sep 23, 2015.

  1. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
  2. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Good news! There are only two weeks for you to contest it,so please don't miss the chance.

    Xvostick has arrived in our warehouse. We will begin to ship after testing, based on order sequence. Today we are going to hold a competition for 3FVape fans. Winner will win a free XvoStick Style Temp Control Box Mod.
    This competition will last for 2 weeks and one winner will be pick up.

    [​IMG]
    valid time:9/26/15 – 10/10/15
    Sponsored by: 3fVape.com

    Please visit 3fvape blog to participate in it, and please click the link: http://blog.3fvape.com/mod-apv/3fvape-xvostick-style-tc-mod-give-away/ to win one.
     
    Last edited: Sep 28, 2015
  3. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
  4. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
  5. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Today let me introduce an accessory that allows you to extend your SX MINi with one more 18650 tube - Battery Extension Tube for SX Mini.This extension tube will allow you to stack 2x 18650 batteries and unlock the 120 watt capability. Will work with S and/or M Class Sx Mini's. But not for use in Temp Sensing Joule Mode. Increase only applies to Non-Temp sensing mode.

    Well Let's see other new arrival products on 3fvape.com.

    Mods:
    Cherry Bomber Mechanical Mod Clone (four colors available)

    SXK Zero Mini Temp Control Box Mod (five colors available), Square LCD shows battery level, wattage, voltage, temperature and resistance; Wattage can be adjusted from 1W to 60W; Temperature control supports Ti (titanium) and Ni (Nickel)

    Atomizers:
    Moloon Hexagonal RDA Clone (five colors available)
     
  6. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Let me introduce the new products today. So look at the atomizers below:

    Atomizers:
    Multi-color Le Magister RDA Clone, multi-color available now. RTA / RDA tank holding approximately 2.5ml of liquid.
    Multi-color Haze Dripper Tank RTA Clone, four colors available. PEI tank is capable of withstanding high temperature and high pressure.
    White Fountain V2 RTA Clone, black one also available. Liquid capacity is 5.0ml.
    Other:
    Replacement Tank for Super Hero / Fountain V2 RTA , works with Supre Hero RTA and Fountain V2 RTA.
     
  7. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Today we only have one RTA clone listed new and together with its accessories. It features with a 4mL large tank but comes in a mini size. Let's see details:

    Atomizers:

    Authentic Sikary Dicey Saint Sub Ohm Clearomizer, 4ml, 0.5 ohm, 20~30W

    Accessories:

    1.5 ohm Authentic Sikary Dicey Saint Replacement Coil Heads, 7~20W, 5 PCS pack, for Sikary Dicey Saint.

    0.5 ohm Authentic Sikary Dicey Saint Replacement Coil Heads, 20~30W, 5 PCS pack, for Sikary Dicey Saint.

    1.5 ohm Authentic Sikary Dicey Saint Replacement Coil Heads, 5 PCS pack, for Sikary Dicey Saint.
     
  8. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Hello,friends! Today let me introduce new products of atomizers. Maybe there are some ones you are interested in.To pick up your favorite one, I would like to recommend the Steam-Crave Aromamizer RDTA.It has a quad/dual 3mm adjustable airflow, features with dual post design for easy coil build, you can even try vertical build on it. Silver plated center pin also bring a good connection. Let's check them out below:

    K.loud+g clone rta rebuildable tank atomizer, It's PEI tank
    Chrysalis clone rda rebuildable dripping atomizer, Proprietary drip tip system with a percolated airflow system.
    Bunker clone rda rebuildable dripping atomizer, 5.5mm deep juice well.
    Super hero clone  rda rebuildable dripping atomizer, Stainless steel + POM hybrid drip tip + top cap combo (9.3mm bore diameter).
    Authentic Komodo sub ohm tank clearomizer, Comes with 0.15 ohm Ni200 temperature control coil head and 0.7 ohm coil head (works with 30~160W).
    Pre-order authentic Steam-crave aromamizer rdta rebuildable tank atomizer, 6mL version.

    Other:
    Authentic Komodo Temperature Control Replacement Coil Heads, works with Authentic Komodo Sub Ohm Tank Clearomizer, Ni200 (0.15ohm), 0.5ohm, 0.7ohm available
    Authentic Vapesoon Protective Sleeve Case for Joyetech eVic VTC Mini 60W TC Mod, design for Joyetech eVic VTC Mini
    Adjustable Airflow 510 Drip Tip
    Flat Mouth 510 Drip Tip
    Glass 510 Drip Tip
    Heart Shape 510 Drip Tip
     
  9. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Today we would like to share a review on a new revolutionary atomizer - The Itsuwa Rage 3-in-1 RDA / RTA / Sub-Ohm Tank, it's an atomizer that you can use it as a RDA, RTA or Sub Ohm Tank. It comes with 0.5 sub ohm coil to serve as a Sub Ohm Tank, together with the RBA deck, you can build your own coil of this atomizer. Additionally, it has a RDA cap which makes in a 3 in 1 atomizer.

    The rage 3-in-1 atomzier comes in a compact clear acrylic box. With their patent no printed on the sruface of the box.

    [​IMG]

    Open the box and we have spare parts on the top. You got a replacement glass tank, a spare coil ( you will have to sub ohm coil in the package, one pre-stalled in the tank and one here on the top of the box), some screws, screw drivers and pre-coiled wire and cotton.

    [​IMG]

    [​IMG]

    It has manual inside the box, it's graphic and shows different parts of the atomizer and give you a fast guide to use this all-in-1 tank.
    [​IMG]

    Then we go to the main body of this 3-in-1 atomizer, the following pic, from left to right, is the RDA/RBA top cap, The sub ohm tank, the RBA coil base. Well the 3 kinds of atomizer in 1 share one deck for different use. The RDA section has its own drip tip and the tank has a different drip tip which comes with adjustable cooling air hole. This kind of drip tip can be found on most sub ohm tank nowaday.

    [​IMG]

    Then we take apart the sub ohm tank, from the left to right:
    The bottom base, the 3 kinds atomizers share it for connecting, screw the RBA deck or the Sub Ohm Coil you can form the Tank/RBA;
    The stainless steel sleeve, personally think it's for decoration, or somehow it can help prevent the glass tube from crashing I think , or at release reduce the hit when the tank drop. You can put it on or just leave it alone;
    The glass tube;
    The sub ohm tank (the pre-build one);
    The top cap of the sub ohm tank, crew this tank on the sub ohm tank and form the air flow when you vape;
    The top cap, this top cap works when you use it as an RTA or Sub Ohm Tank.

    [​IMG]

    The following pic we just shown the base, sub ohm coil, sub ohm coil cap screwed together

    [​IMG]

    You will have two sub ohm coil in the package , 0.3ohm one can power 40-120W and the 0.5ohm one with 30-75W.
    [​IMG]

    Then we try the rba deck, the rba deck has 2 positive post and 2 negative post for you to build your coil. the chimney is small. [​IMG]

    Air flow go straight from the bottom air hole to the air hole underneath the coil. You build you coil above the hole and your cotton will lay right down the little well around for juice feeding.The juice flow hole is not that big but some how it works actually good. However, the air flow design may cause some leaking but now much, so it's not bothering me.

    [​IMG][​IMG]

    To screw the chimney on an you can form this into a RTA, personally think the best role of this atomizer is RTA, It brings good flavor and warm vape.

    [​IMG]





    The RDA top cap also has a top adjustable air flow control, but to me it bothers, as it already has the bottom to top air flow, the air flow in the body ruins the taste. So why not just keep the door closed.

    [​IMG]

    Following is an unboxing video of this Itsuwa Rage 3-in-1 RDA / RTA / Sub-Ohm Tank unboxing video, just shows what's inside and shows how to switch from Sub ohm tank to RTA to RDA.


    If you are looking for a RDA, RTA Sub Ohm Tank, then this All in 1 Rage Tank is a good choice for you.

    Itsuwa Rage 3-in-1 RDA / RTA / Sub-Ohm Tank is available now on 3FVAPE for $31.99

    [​IMG]
     
    Last edited: Nov 18, 2015
  10. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Hello, friends! Today let me show friends some new mods and atomizers. Maybe they are your taste. Let's check them out below:

    Mods:
    Tugboat v2 clone 180w vv box mod-$37.99, Voltage can be adjustable from 3V to 6V, four colors available.

    Pre-order authentic playboy lux 150w tc vw mod + vixen tc tank starter kit-$129.99, This exciting sub-ohm tank has triangular adjustable airflow, a 4.5mL capacity, and nickel coil compatibility.

    Pre-order authentic playboy lux 150w tc vw mod-$99.99, Wattage can be adjusted from 3W to 150W.

    Pre-order authentic playboy lux 65w 4400mah tc vw mod + vixen tc tank starter kit-$99.99, Wattage can be adjusted from 3W to 65W in 0.1W increments.

    Pre-order authentic pioneer4you ipv d3 tc vw apv box mod-$45.99, IPV D3 80W is using real magnet battery cover, it has voltage Step Down, supports lowest resistance 0.1 ohm.
     
  11. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Hello, friends! Welcome to 3fvape official thread every day! Today let me recommend some mods and others, so look at them below:

    Mods:
    Sxk s80 80w tc vw mod $36.99 for free shipping on 3fvape.com. Wattage can be adjustable from 1W to 80W.
    [​IMG]

    Hexohm v3 clone vv mod $41.99 for free shipping on 3fvape.com. Voltage can be adjusted from 3.49V to 5.77V.
    [​IMG]

    Yep hell's gate mini 75w 2400mah tc mod $57.99 for free shipping on 3fvape.com, four colors available. Wattage can be adjustable from 5W to 75W.
    [​IMG]

    Yep sub one-s 100w 2200mah battery mod $21.99 for free shipping on 3fvape.com, four colors available. 510 threading connection with silver-plated brass spring loaded center pin.
    [​IMG]

    Kits:
    Joyetech evic-vtc mini vw mod + tron-t atomizer full kit $48.99 for free shipping on 3fvape.com. It can be shipped in 24 hours during working days.
    [​IMG]

    Kanger subox mini pro 75w mod + top filling mini clearomizer starter kit $54.99 for free shipping on 3fvape.com. Convenient top liquid filling.
    [​IMG]

    Drip tip:
    510 drip tip, random color, stabilized wood + stainless steel, 14.5mm $21.99 for free shipping on 3fvape.com. Stabilized wood mouthpiece and stainless steel base.
    [​IMG]
     
  12. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    The weekend comes! Have a good time on weekend! Today let me recommend some atomizers and mod kits below:

    Atomizers:
    Youde Zephyrus V2 Updated Sub Ohm Tank, Stainless Steel + Glass, 6mL, 0.3 / 1.8 ohm, 22mm, $24.99 for free shipping, upgraded from Zephyrus V1 with unique design of prevent condensation on the bottom, larger capacity and top filling design, stronger and taste better than the Zephyrus V1.
    [​IMG]
    Wi-Fi clone RDA, Stainless Steel, 22mm Diameter, $7.99, Solid drip cap structure for better performance.
    [​IMG]
    304 SS SnapDragon RDA Clone, 304 stainles steel, multi-color available, $10.99. Post slots can be adjusted to face inward for more flexible building.
    [​IMG]
    Indestructible RDA Clone, Stainless Steel, 22mm Diameter,$9.69, Allows for incredibly large coil configurations.
    [​IMG]
    Mod Kits:

    Innokin Cortex 80W TC + iSub S Tank Starter Kit, 6~80W, 4.5mL, 0.1 Ohm, four colors available, $62.99 for free shipping. Wattage can be adjusted from 6.0W to 80W in 0.5 watt increments.
    [​IMG]
    Atto Mechanical Mod Clone + Pico RTA Clone Kit, Stainless Steel, 3mL, 1 x 18650 / 18350, $36.99 for free shipping, 316 Stainless steel construction and PEI tank, PEEK insulator.
    [​IMG]
    Vaporesso Target VTC 75W + Ceramic cCELL Coil Tank Starter Kit, Black, 5~75W, 3.5mL, 0.9 Ohm, 1 x 18650, $65.99 for free shipping. Wattage can be adjustable 5W to 75W.
    [​IMG]
     
  13. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    The Double Cross Clone Mechanical Mod $18.99, free shipping. This mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.

    The Spectrum Mechanical Mod Clone $18.99, free shipping. The Spectrum clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.

    The Stealth Mechanical Mod Clone $18.99, free shipping. The Stealth clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.

    Comp Lyfe HK Diamond Knurl 25mm Mechanical Mod Clone $21.99, free shipping. The Complyfe HK Knurled style mod is with 25mm battery tube. It is with simple design with a fixed 510 hybrid top to improve conductivity. There are 9 vent holes throughout the mod to keep your battery cool and in case of venting

    Taiji clone Mechanical Mod $23.99, free shipping. The Taiji Style Mechanical Mod is constructed from copper and powered by 1 x 18650 battery. There is no positive pin, so the atomizer will connect to the battery directly.

    Original Smoant Battlestar 200W TC Box Mod $42.99, free shipping. The Authentic Smoant Battlestar 200W TC Box Mod supports maximum output wattage up to 200w, powered by 2 x 18650 batteries (not included). The 200W mod supports resistance as low as 0.05 ohm under temperature control mode. TC supports NI200, TI, SS, TCR output. The temperature control range from 100'C to 300'C, never have dry hit, brings vapers better vaping experience. The front of Smoant battlestar is with bright and clear OLED screen, shows the vaping information easily.

    TFMT RTA Clone $17.99, free shipping. The TFMT Style RTA is with incredible flavor, but it is also made for the cloud chaser. The huge build deck and generous juice channels means it can handle series coils and high power. This truly is a dripper experience in a tank. The Top-Flow Mega Tank is with a quad-post deck, Top filling system and a shorter profile.

    Thanatos RDA Clone $10.59. The Thanatos Style RDA is constructed from stainless steel and in 24mm diameter. The RDA is with dual-pole Velocity style Deck design. The RDA supports airflow control from bottom, side and top. The Thanatos Style RDA comes with wide bore drip tip and 510 drip tip adapter.

    Split Atty RTA Clone $10.79. The Split Atty Style RTA is a rebuildable tank atomizer features 22mm diameter and 2ml e-juice capacity. The Split Style RTA is constructed from 316 Stainless Steel and Glass. Comes with dual post deck, big build room, this Split Style RTA will bring you a good vaping experience!
    The Split RTA comes without bottom feeder pin and baffle. The Split Atty RTA is recommended to use with box mod due its 510 thread is a little short.

    SXK Petri RTA Clone $21.90, free shipping. The SXK Petri Style RTA is with postless deck design to allow for easy building and cleaning of the beautiful 4 x plated gold plated finish. The post clamps on the RTA use wide clamping holes to fit complex and large builds, while maintaining an easy to wick design.

    The Double Cross Mechanical Mod Clone + Battle RDA Clone Kit $25.99, free shipping. The Double Cross Style Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
    The Complyfe Battle style RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.

    The Spectrum Cross Mechanical Mod Clone + Battle RDA Clone Kit $25.99, free shipping. The Spectrum Style Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
    The Complyfe Battle style RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.

    The Stealth Cross Mechanical Mod Clone + Battle RDA Clone Kit $25.99, free shipping. The Stealth Style Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
    The Complyfe Battle style RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.

    Authentic Smoant Knight V2 80W TC VW Variable Wattage Mod + Talos V1 Tank Kit $49.99, free shipping. The Authentic Smoant Knight V2 kit is the upgraded version of Knight V1, lightweight and with compact size. The Smoant Knight V2 Mod supports the atomizer with maximum diameter up to 23.5mm and can control the airflow conveniently. The Knight V2 mod supports maximum wattage output up to 80 watts and supports resistance as low as 0.1 ohm. The mod is with large OLED screen, very convenient to use. The new Smoant vape kit is powered by 1 x 18650 battery, with magnetic back cover, easily replace battery. The standard micro USB port allow vapers charging the battery directly, but better use battery charger.
    The Talos V1 tank can hold 4.5ml e-juice, with top refill design, bottom with big airflow adjustable slots, vapers can inject e juice and adjust the airflow to your preference easily. The Smoant temperature control vape kit support Ni200, Ti, SS, NIchrome and TCR output modes.

    Authentic IJOY Limitless Lux 215W Mod Replacement Sleeve $17.39, free shipping Authentic IJOY replaceable sleeve is suitable for Limitless Lux 215W box Mod. Get one to made your mod different.

    Stainless Steel Drip Tip for Aspire Nautilus X Clearomizer $1.99. The special drip tip is made from stainless steel with 14mm length and 11.6mm diameter. This drip tip is suitable for Aspire Nautilus X Clearomizer.

    Authentic Mighty Dynamic Armor Dragon Resistance Wire $10.99. For building your own RDA RTA RBA, Ni80 and 316 stainless stell available
     
  14. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    IDA Concept RDA Clone $21.99, free shipping. The IDA Concept clone RDA is constructed from 316 stainless steel and in 24mm diameter. The RDA supports airflow control from the top cap. The RDA kits comes with dual coil deck (pre-installed) and single coil deck for replacement. The product box is also a building deck for all 510 atomizers.
    [​IMG]
    SJMY AP Vector RDA Clone $17.99, free shipping. The SJMY AP Vector clone RDA is established on the basis of the tank Nectar, but with significant changes in the design for a dripper vape and a more rapid change of tastes and different amounts. Dripper completely disassembled for ease of maintenance and washing. The tank holds about 1.4mL juice for 30~40 drops.
    [​IMG]
    Battlefield Mechanical Mod Clone + Battle RDA Clone Kit $26.99, free shipping. The Battlefield clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Battlefield mod.
    The Complyfe Battle clone RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
    [​IMG]
    Replacement PEI Tank for iDA Concept Style RDA $7.29 The Replacement PEI Tank is designed for iDA Concept clone RDA. There are dual air slot in the bottom and supports 510 drip tip.
    [​IMG]
     
  15. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    VGOD Pro Mechanical Mod Clone - Brass $21.99, free shipping. Constructed of durable brass and treated with a durable matte black coating. 24mm diameter perfect for 24mm RDAs
    [​IMG]
    VGOD Pro Mechanical Mod Clone - Copper $21.99, free shipping. Constructed of durable copper and treated with a durable matte black coating. 24mm diameter perfect for 24mm RDAs
    [​IMG]
    Kindbright TimeKeeper Time Keeper V2 Mechnical Mod Clone $23.99, free shipping. This mod is made from brass, comes with adjustable brass bottom-fire button with opposing earth magnet. Come in silver, black and golden in color.
    [​IMG]
    Original Ceravape Cerabis 44 Ceramic Sub Ohm Tank $22.99, free shipping. 2.0mL, 0.5 Ohm, 22mm Diameter. Includes a hidden airflow control that is incorporated into the top-fill mechanism. With coil cleaning function, you can take the coil out for cleaning. The Ceravape Cerabis 44 is used 100% Food Grade Nanometer ceramic coils and containing a vertical ceramic coil and top-fill method with an e-liquid capacity of 2ml.
    [​IMG]
    Original Ceravape Cerabis 45 Ceramic Sub Ohm Tank $23.59, free shipping. 2.5mL, 0.5 Ohm, 22mm Diameter. Includes a hidden airflow control that is incorporated into the top-fill mechanism. With coil cleaning function, you can take the coil out for cleaning. The Ceravape Cerabis 45 is used 100% Food Grade Nanometer ceramic coils and containing a vertical ceramic coil and top-fill method with an e-liquid capacity of 2.5ml.
    [​IMG]
    VGod TrickTank Pro RDTA Clone $13.99. Large dual post design for dual coil installation. Color in silver, golden and black. Features a 4mL capacity tank with a convenient side fill hole & large dual airflow channels that feed directly towards the coils for a constant and direct coil airflow providing Maximum Flavor and Vapor Production.
    [​IMG]
    Comp Lyfe HK Diamond Knurl 25mm Mechanical Mod Clone + Mini Battle RDA Clone Kit $27.99, free shipping. 25mm battery tube, 9 vent holes for cooling. The Mini Battle RDA Clone comes with triple post design and is a great match with the HK 25 Clone.
    [​IMG]
    Original Ceravape Cerabis 44 / 45 Nanometer Ceramic Coil $13.99 0.5 Ohm, 40~60W, 4 PCS pack. The coil is compatible with the new Cerabis 44 and 45 tank. The coils features a solid core, food grade ceramic core embedded with a vertically orientated heating element. Each ceramic core consists of high strength nanometer ceramic, and features a 100% ceramic construction for the wicking element.
    [​IMG]
     
  16. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Demon Killer 7-in-1 28 PCS Coil + Allen Key Violence Coil Kit $11.99 The kit comes with 1 x Allen Key, 4 x Alien V2 coils, 4 x Tsuka Coils, 4 x Clapception Coils, 4 x Framed Clapton Coils, 4 x Spaced Clapton Coils, 4 x Tri-twisted Clapton Coils, 4 x Staple Staggered Fused Clapton Coils, and an Allen Key.
    [​IMG]
    Original Demon Killer Framed Clapton Coil $5.99 The Original Demon Killer Framed Clapton Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.26 ohm resistance and 10 PCS pack.
    [​IMG]
    Original Demon Killer Clapception Coil $5.99 The Original Demon Killer Clapception Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.35 ohm resistance and 10 PCS pack.
    [​IMG]
    Original Demon Killer Tri-Twisted Clapton Coil $5.99 The Original Demon Killer Tri-Twisted Clapton Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.35 ohm resistance and 10 PCS pack.
    [​IMG]
    Original Demon Killer Spaced Clapton Coil $5.99 The Original Demon Killer Spaced Clapton Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.35 ohm resistance and 10 PCS pack.
    [​IMG]
    Original Demon Killer Staple Staggered Fused Coil $5.99 The Original Demon Killer Staple Staggered Fused coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.3 ohm resistance and 10 PCS pack.
    [​IMG]
    Original Demon Killer Tsuka Coil $5.99 The Original Demon Killer Tsuka coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.25 ohm resistance and 10 PCS pack.
    [​IMG]
    Original Demon Killer Alien V2 Coil $5.99 The Original Demon Killer Alien V2 coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.25 ohm resistance and 10 PCS pack.
    [​IMG]
     
  17. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Authentic IJOY MAXO Quad 18650 315W Box Mod $49.99, most countries free shipping. The Authentic IJOY MAXO is the first quad 18650 BOX MOD, two 18650 also work. 5~315W adjustable. Four color available.
    [​IMG]
    Authentic Hugo Vapor Boxin DNA 75 Box Mod $89.99, most countries free shipping. The Authentic Hugo Vapor BOXIN mod is used the original Evolv DNA75 chipset. The Hugo Vapor BOXIN DNA 75 is combining an ergonomic portable form factor with premium pure die cast zinc alloy material and amazing cute holding shape.
    [​IMG]
    Authentic Ehpro Billow V2.5 RTA - Silver $25.99, most countries free shipping. The Billow V2.5 RTA has the same unique exterior design as the Billow V2. The Billow V2.5 RTA feature a 24mm diameter base and top cap with the glass tank section tapering out to 25mm, the Billow V2.5 is with 6mL juice capacity and convenient top-filling system.
    [​IMG]
    Authentic Ehpro Billow V2.5 RTA - Black $26.99, most countries free shipping.
    [​IMG]
    Origen Little RDA Clone $9.99. 316 Stainless Steel, 16mm Diameter, Dual pole desigan and support bottom feed.
    [​IMG]
     
    DogMan likes this.
  18. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
  19. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Artery Nugget V2 50W 1500mAh Box Mod $29.99, most countries free shipping. Artery Nugget V2 is the smallest 50W box mod in the market. It is constructed from zinc alloy
    [​IMG]
    Complyfe Vortex Mechanical Mod Clone $23.99, most countries free shipping. The Complyfe Vortex clone Mechanical Mod is constructed from brass with silver plating and powered by 1 x 18650 battery.
    [​IMG]
    VIRUS RDA Clone $11.99 The VIRUS clone RDA is constructed from stainless steel and in 24mm diameter. The RDA is with Kennedy clone bottom airflow. the Virus clone RDA is with dual stainless steel clamps with gold plated posts.
    [​IMG]
    Original SMOKTech TFV8 Big Baby Sub Ohm Tank $23.99, most countries free shipping. 5mL, 0.15 Ohm, 24.5mm Diameter, bigger e-juice capacity and more vapors will let you enjoy pleasant vaping time.
    [​IMG]
    Original Artery Nugget V2 50W + Trace Sub Ohm Tank Starter Kit $42.99, free shipping for most countries. The Nugget V2 Kit by Artery come with Nugget V2 50W TC Mod and Trace Sub Ohm Tank.
    [​IMG]
    Replacement Drip Tip for GeekVape Griffin 25 / Mini $3.99 The drip tip is suitable for GeekVape Griffin 25 Standard Version / Top Airflow Version and Griffin 25 Mini RTA.
    [​IMG]
    Replacement Drip Tip for IJOY Limitless Plus RDTA $4.69 The drip tip is suitable for IJOY Limitless Plus RDTA. The resin drip tip will be shipped in random color (one piece will be shipped).
    [​IMG]
    Replacement Drip Tip for 25mm RDA $6.99 The Replacement Drip Tip is suitable for 25mm RDA. The resin drip tip will be shipped in random color (one piece will be shipped).
    [​IMG]
    Replacement Honeycomb Drip Tip for Council of Vapor Vengeance Atomizer $3.99 The honeycomb shield is attached to the bottom of the resin drip tip to prevent spit back. The resin drip tip is suitable for Council of Vapor Vengeance Atomizer.
    [​IMG]
     
  20. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Lost Vape Triade Triple DNA200 - Black PU $129.99, free shipping for most countries. 1~200W, 3 x 18650, DNA200 chip
    [​IMG]
    Cleaning Tool / Brush for RDA Coil $1.99 The cleaning tool / brush is perfect for RDA Coil. The highly attractive clean performance, prevent and clean the carbon deposition and the greasy dirty on the coil. It is great for healthy vaping.
    [​IMG]
    Stabilized Wood 510 Drip Tip $5.59 This 510 drip tip is made from stabilized wood and stainless steel. It features a 15.5mm length. The stabilized wood material will offer this 510 drip tip a long life span. There are 4 different colors and will be shipped by random color (only one piece).
    [​IMG]
    Wide Bore Drip Tip for CoilArt MAGE RTA $4.99 The wide bore drip tip is suitable from CoilArt MAGE RTA atomizer. The drip tip is made from Resin, with hollow center, this wide bore drip tip will bring you good vaping experience! This drip tip will be shipped by random color (only one piece)!
    [​IMG]
    Replacement Drip Tip / Top Cap for 24mm 528 Goon RDA $7.99 The resin drip tip top cap is suitable for 24mm diameter 528 Goon RDA. The drip cap is in 24mm diameter and 8mm bore diameter.
    [​IMG]
     

Share This Page