1. Thank you to all those who submitted to the Federal Inquiry into E-Cigarettes for making your story count in the fight to legalise nicotine in Australia. Submissions may be viewed HERE.
    Dismiss Notice

Daily New on 3fvape.com

Discussion in '3FVape' started by 3FVAPE, Sep 23, 2015.

  1. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original KAEES Pacer RTA Rebuildable Tank Atomzier $23.99
    The original KAEES Pacers RTA is an atomizer that can be used as a clearomizer or a rebuildable tank atomizer. It is constructed from stainless steel and glass in 22mm diameter, and has a capacity of 3ml. It is very convenient to refill e-juice by the side. Pacer matches with any different heating coil fuse, including ordinary heating fuse and clapton fuse. The factory coil can match up with Atlantis and iJust coil. Pacer also features two posts with four screw holes in the deck, supporting both single and dual coil, along with bottom adjustable airflow.This item also has several different colors to choose.
    [​IMG]

    Goon V1.5 RDA Rebuildable Dripping Atomizer Clone $7.59
    The Goon V1.5 RDA Clone is constructed from POM (drip tip, sleeve) and stainless steel (base) in 24mm diameter. The drip tip is integrated with the top cap. It features bridge clamp design for easy building and two middle side air slots for adjustable airflow control.
    [​IMG]

    Sherman RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99
    The Sherman RDA Clone is constructed from stainless steel in 28mm diameter. It comes with a two-post clamp style build deck and redirected bottom airflow. The RDA is designed for large coils. There is a wide build deck with two large clamp style posts and redirected airflow channels that are raised above the juice well for enhanced flavor production. The RDA features an adjustable bottom airflow control ring and comes with a wide bore 810 drip tip.
    This RDA comes with bottom feeder pin.This item also has another different color to choose.
    [​IMG]

    YFTK Le Papillon Lepapillon RDA Rebuildable Dripping Atomizer Clone with BF Pin $12.99
    The YFTK Le Papillon RDA Clone is a mini size rebuildable dripping atomizer that is constructed from stainless steel in 16mm diameter. It features a two post build deck for single coil and top airflow system. It comes with removable drip tip. All parts of the RDA are detachable, making it very easy to maintain and clean.
    This RDA comes with bottom feeder pin.
    [​IMG]

    Original Vapjoy 810 Wide Bore Drip Tip for TFV8 / TFV12 / Goon / Kennedy $1.99
    The Vapjoy 810 drip tip is made from resin. It measures 16mm in outer diameter and 18mm in height. The 810 connector is 12.5mm in diameter. It is suitable for SMOK TFV12 tank, TFV8 tank, TFV8 Big Baby Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    [​IMG]

    Replacement Base for AV Series Style Mechanical Mod $2.99
    The replacement base is designed for AV series mechanical mods, like AV Able style and AV Timekeeper style mods. It is made from aluminum in 22mm diameter.
    This product is only suitable for AV Style series mods from 3FVAPE. 3FVAPE is not sure if it is compatible with the mods from other sources. Please consider before your purchase.This item also has several different colors to choose.
    [​IMG]

    Saw Blade Style Replacement Hybrid Top Cap Hat + Keyswitch Disk Base for Authentic AV Mechanical Mod $7.69
    The replacement saw blade top cap and base are designed for AV series mechanical mods, like AV Able and AV Timekeeper mods. It is made from stainless steel in 24mm diameter.
    This product is only for authentic AV mods, Please consider before your purchase.This item also has several different colors and material to choose.
    [​IMG]
     
  2. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Sigelei KAOS Holi Spectrum 230W TC VW Variable Wattage Box Mod $48.99
    The Spectrum offers up to 230 watts of regulated power right off the bat, allowing the full range from newbie to seasoned vapers the adaptability to your favorite atomizers. The Spectrum is a compact and light weight mod. Standing at a mere 88mm composed mainly of zinc alloy, expect a light and ergonomic feel on the hand. The Spectrum also boasts a 0.96" TFT color screen display allowing for all pertinent information ranging from battery, power output, and resistance to be shown with ease. Lastly, the buttons on the Spectrum are tactile, responsive, and serve as a brilliant compliment to the overall look and feel of the mod.
    [​IMG]

    Avid Lyfe Able XL Hybrid Mechanical Mod Clone $17.99
    The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass (mod) and carbon fibre (sleeve) in 24mm diameter. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod is powered by 1 x 18650 battery (not included).This item also has different colors and matierials for choose.
    [​IMG]

    Apocalypse GEN 2 RDA Rebuildable Dripping Atomizer Clone with BF Pin $7.99
    The Apocalypse Gen 2 RDA Clone is with clamp design and has a massive 13mm space in each clamp which provides space for mounting the most complex and insane coil builds. Coupled with the 4mm deep juice well, 21mm build deck, durable post clamps and extended post screws, the Apocalypse Gen 2 Style RDA is a builder's dream.
    This RDA comes with bottom feeder pin.
    [​IMG]

    ShenRay Das Tank Ding RTA Rebuildable Tank Atomizer Clone $35.50
    The ShenRay Das Tank Ding RTA Clone is constructed from 316 Stainless Steel and PEEK material in 22mm Diameter. It features 4ml capacity, tri-post build deck for both single and dual coil, and top adjustable airflow system. The RDA comes with a removable wide bore drip tip.
    [​IMG]

    ShenRay FEV4 RTA Rebuildable Tank Atomizer Clone $17.99
    The ShenRay FEV4 RTA Clone is constructed from stainless steel in 22mm diameter. It comes with glass tank with 5ml capacity. It features reverse filling system, a two-post build deck for single coil and middle airflow system with single airhole. The RTA comes with a removable long 510 drip tip and extra tank sleeves.
    [​IMG]

    ShenRay Genelocity Giant RTA Rebuildable Tank Atomizer Clone $32.99
    The ShenRay Genelocity Giant RTA Clone is absolutely a giant in the market. It is constructed from stainless steel in 32.5mm diameter. The glass tank features a huge capacity of 12ml. The large build deck, with two four-screw-hole posts in it, supports large clapton coils. The innovative adjustable top cap features two sets of air slots and holes. You can change it 180 degrees for another type of airflow at anytime. The RTA comes with removable wide bore drip tip and 510 drip tip adaptor to meet your different meets.
    [​IMG]

    ShenRay FEV dD RTA Clone Rebuildable Tank Atomizer $32.99
    The ShenRay FEV dD RTA Clone is constructed from 316 stainless steel in 32.5mm diameter. The tank features a huge capacity of 19.5ml. The 24mm large build deck features two top-screw design posts for large coil building. The RTA comes with middle airflow system with an adjustable hollow pin. The RTA comes with a removable 510 drip tip and extra stainless steel and glass tube.
    [​IMG]

    SXK Goon 1.5 RDA Clone Rebuildable Dripping Atomizer w/ BF Pin $12.99 after add to cart
    The SXK Goon 1.5 RDA Clone is constructed from medical grade 316 stainless steel in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 POM wide bore drip tip.
    This RDA comes with gold plated bottom feeder pin.
    Write a review
    Earn up to $50 through our Product Review Program.


    [​IMG]

    Original Eleaf LEMO 3 Tank Replacement Tube Sleeve $1.19
    The Original Eleaf replacement tube is made from glass and it is suitable for Eleaf LEMO 3 RTA. It is 22mm in diameter and 30mm in height.
    [​IMG]

    ShenRay Replacement Chimney for SR V4 RTA Clone $2.59
    The ShenRay replacement chimney is made from stainless steel. It is suitable for ShenRay SR V4 RTA Clone. The connector is 6.9mm in diameter, the bottom diameter is 16.2mm, and the height is 28.5mm. It comes with two air holes on the bottom side.
    [​IMG]

    Original Vapjoy Jellyfish Organic Wicking Cotton Mini Pack for RDA / RTA / RDTA Atomizer $1.39
    Jellyfish cotton pack has been specifically manufactured for vaping. We selected top rank quality natural organic cotton fiber. The cotton is taken with proprietary purification process to remove impurities, natural oils and pesticides. The medical level facilities make sure all processing are carefully treated and 100 percent tasteless cotton for wicking.
    [​IMG]

    ShenRay Replacement Resin Drip Tip + Heating Wires + Stainless Steel Mesh for Taifun BT Atomizer Clone $3.99
    The ShenRay replacement drip tip is made from resin. The heating wires and the mesh are made from stainless steel. All of them are suitable for Shenray Taifun BT tank atomizer Clone.
    This product comes with 1 x drip tip, 2 x mesh and 4 x heating wires, totally 7 PCS in one pack. The drip tip will be shipped in random color.
    [​IMG]

    Original SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mods $6.99
    The Original SJMY Bottom Feeder Bottle is made from silicone and the top cap is made from stainless steel. It feels super soft and smooth. The bottle holds about 6ml of e-juice and it is universal suitable for BF squonk mods in the market.
    [​IMG]

    YFTK Replacement Drip Tip + Sleeve for Armor 1.0 RDA Clone $14.99
    The YFTK replacement drip tip and sleeve are made from PEI. The drip tip is 11mm in diameter and 13.4mm in height. The sleeve is 22mm in outer diameter and 17mm in height. It comes with an inner cap to adjust airflow with two middle air slots on the side of the sleeve.
    [​IMG]

    510 Hand Spinner Fidget Toy for RDA / RTA / RDTA / Sub Ohm Tank Atomizer $4.99
    The 510 Hand Spinner Fidget Toy is made from stainless steel. It features a 510 connector, hexagonal shape with dice design, and stainless steel bearing. The spinner is installed between the mod and the atomizer. You can play the spinner when you vape, bringing you interesting vape experience.
    [​IMG]
     
  3. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    AV Able XL Hybrid Mechanical Mod Clone $18.99
    The AV Able XL Mechanical Mod Clone is constructed from brass (mod) and carbon fibre (sleeve) in 24mm diameter. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod is powered by 1 x 18650 battery (not included).This item also have a copper version to choose.
    [​IMG]

    AV Able XL Hybrid Mechanical Mod Clone - Random Color $19.99
    The AV Able XL Mechanical Mod Clone is constructed from brass (mod) and resin (sleeve) in 24mm diameter. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod is powered by 1 x 18650 battery (not included).
    This mechanical mod will be shipped in random color (resin sleeve).
    [​IMG]

    Luxifer Mechanical Mod Clone $20.99
    The Luxifer mechanical mod Clone is constructed from copper in 25mm diameter. It features knurled top hat with 510 threading connection. It comes with adjustable center pin. This mod is powered by one single 18650 battery (not included).
    [​IMG]

    Original Fogworx Slider RTA Rebuildable Tank Atomizer $24.99
    The Fogworx Slider RTA is a 25mm diameter tank atomizer that is designed with a massive 5.5 ml e-juice tank for maximum convenience. This stylish tank atomizer is top filling design. With the help of a single piece slider, it is much easier to refill e-juice than ever before. The deck features two posts that support a single coil. Slider also features Cycloptic adjustable bottom airflow.This item also has different colors to choose.
    [​IMG]

    Mulciber RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.39
    The Mulciber RDA Clone is constructed from 316 stainless steel in 22mm diameter. It comes with two posts design for single or dual coil build. The RDA has two airflow rings. Each airflow ring has two stacked slots for vertical or dual coil build and a single slot for more restricted airflow or single coil build. The RDA supports both bottom feeder dripping and normal dripping.
    [​IMG]

    VGOD Elite Hybrid Mechanical Mod Clone + VGOD Pro Drip RDA Clone Kit $24.99
    Mod:
    The VGOD Elite Style Mechanical Mod features a "flare grip" chassis with hard hitting copper construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.

    RDA:
    The VGOD Pro style RDA features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up. The VGOD Pro Drip style RDA features a durable stainless steel (base) and copper (sleeve) construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.
    [​IMG]

    510 Drip Tip Adapter for TFV8 / TFV8 Big Baby / TFV12 Tank Atomizer $2.59
    This 510 Drip Tip Adapter is made from epoxy resin. With the 12.5mm diameter connector, it is suitable for SMOK TFV12 / TFV8 / TFV8 Big Baby tank clearomizer. With this adapter, you can use the standard 510 drip tip in your TFV8 / TFV8 Big Baby / TFV12 Tank.
    This product only comes with a 510 drip tip adapter, the drip tip is not included.This item also has different colors to choose.
    [​IMG]

    Replacement Tank Sleeve for Authentic Fumytech Dragon Ball RDTA $3.99
    This repalcement tank sleeve is made from resin. It measures 30mm in outer diameter and 20mm in height. It is suitable for original Fumytech Dragon Ball RDTA.This item also has different colors to choose.
    [​IMG]

    Original Minions E-juice Liquid for E-cigarettes $7.59
    The Minions E-juice from Malaysia is lychee ice flavor. It comes with 30ml e-juice and the nicotine content is 3mg/ml.This item also have different flavors to choose.
    [​IMG]

    Original Area 51 Pearl Harbor E-juice Liquid for E-cigarettes $7.59
    The Pearl Harbor E-juice from Area 51 is apple flavor mixed with blueberry flavor. It comes with 30ml e-juice, 2mg/ml nicotine content, 80% VG and 20% PG content.This item also have different flavors to choose.
    [​IMG]

    Original Area 51 E-juice Liquid for E-cigarettes $12.99
    The Area 51 E-juice liquid is ice yellow peach flavor. It comes with 60ml e-juice, 2mg/ml nicotine content, 80% VG and 20% PG content.This item also have different flavors to choose.
    [​IMG]
     
  4. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Icarus BF Squonk Mechanical Box Mod Clone with Extra Orange Front + Back Cover Plates $29.99
    The Icarus BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use.
    This product comes with one black mechanical mod (with black cover plates), and two extra orange cover plates (1 x front plate, 1 x back plate).This product has many color to choose.
    [​IMG]

    AV Hulk Mechanical Mod Clone $20.99
    The AV Hulk Mechanical Mod Clone is constructed from brass in 25mm diameter. It features uneven sleeve for easy grab. The bottom fire button contains opposite magnets and just need little strength to fire the mod. It is powered by 1 x 18650 battery (not included).This product has many matierial to choose.
    [​IMG]

    Kindbright Sherman RDA Rebuildable Dripping Atomizer Clone with BF Pin $13.99
    The Kindbright Sherman RDA Clone is constructed from 316 stainless steel in 28mm diameter. It comes with a two-post clamp style build deck and redirected bottom airflow. The RDA is designed for large coils. There is a wide build deck with two large clamp style posts and redirected airflow channels that are raised above the juice well for enhanced flavor production. The RDA features an adjustable bottom airflow control ring and comes with a wide bore 810 drip tip.
    This RDA comes with bottom feeder pin.This product has many color to choose.
    [​IMG]

    Original Uwell Crown 3 Mini Sub Ohm Tank Atomizer $21.99
    The UWELL Crown 3 Mini Sub Ohm Tank is the new blood of the Crown series. Comes with 22.6mm diameter, it features sleek and smart design, Quartz glass tank with 2 / 4.5ml juice capacity, leak-proof threaded top-fill design, and the innovative plug-pull parallel coil structure.This product has many color to choose.
    [​IMG]

    ShenRay Das Tank Ding RTA Rebuildable Tank Atomizer Clone $35.50
    The ShenRay Das Tank Ding RTA Clone is constructed from 316 Stainless Steel and PEEK material in 22mm Diameter. It features 4ml capacity, tri-post build deck for both single and dual coil, and top adjustable airflow system. The RDA comes with a removable 510 wide bore drip tip and a display base stand.
    [​IMG]

    AV Hulk Replacement Casing Tube Sleeve Clone for AV Mechanical Mod Clone $10.99
    The replacement casing tube sleeve is made from brass in 25mm diameter. The AV Hulk sleeve Clone is suitable for AV Style Mechanical Mod. It not only protects your mod, but also make the mod easy to grab by its uneven surface.This item also has other material to choose.
    [​IMG]

    Original Joyetech ATOPACK JVIC Coil Heads for ATOPACK Penguin Vaporizer Kit $7.99
    The innovative Joyetech JVIC (Juice Vertical Injection Coil) system adopts a unique method of vertical juice injection resolution. It has a brilliant ceramic cradle which takes a horizontal approach in discovering original and clear flavor as well as large clouds. The Joyetech ATOPACK JVIC coil heads are designed for ATOPACK Penguin, and comes with a resistance of 0.25 ohm for direct lung vaping.
    This product comes with 5 PCS in one pack.This product also has a 0.6 ohm version to choose.
    [​IMG]

    Self-adhesive Skin Sticker Wrap Cover for Sigelei Kaos Spectrum 230W Mod $1.49
    The self-adhesive skin sticker wrap cover is suitable for authentic Sigelei Kaos Spectrum 230W Mod. It is easy to stick on without any bubble. With precision cut, access to switches, buttons, and knobs. The sticker will protect your mod from scratch, fade, peel, dirt and water. It is easy to remove without leaving a sticky residue. High definition printing, the color is bright and do not fade.
    Sticker only, the mod in the picture is not included.This product also has other Pattern to choose.
    [​IMG]
     
  5. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Pioneer4you IPV Velas 120W TC VW Variable Wattage Box Mod $56.99
    The Pioneer4you IPV Velas TC VW Variable Wattage Mod is coming soon, with its powerful design. Powered by YiHi SX410 chipset and two 18650 batteries, the power output of IPV Velas can reach from 10W to 120W. The display screen indicates all the vaping data needed.This item also has many color to choose.
    [​IMG]

    Original SMOKTech SMOK TFV8 X-Baby Sub Ohm Tank Atomizer $23.99
    Among TFV8 series with stylish bottom airflow system, it is TFV8 X-Baby with top airflow that we are making the attempt to provide an entirely different tank for clouds chasers. And our engineers make innovation on both the structure and coil's design. So it brings massive clouds, rich flavor, smooth airflow and pleasant atomization sound after repeated test and improvement. Besides, large 4.0ml capacity and classical swivel top cap design makes refilling and leak-proof easier. Finally, as the baby beast brother, TFV8 X-Baby will be a surprise member of TFV8 family. Innovation keeps changing the vaping experience.This item also has many color to choose.
    [​IMG]

    Original Cthulhu CETO RDA Rebuildable Dripping Atomizer with BF Pin $33.95
    The CETO 24mm RDA is the first mesh rebuildable platform from Cthulhu MOD, presenting an innovative elongated two-post design with clamp mechanism to lock the piece mesh to deliver an extraordinary flavor experience. The CETO RDA measures 24mm in diameter with an extended body chassis to accommodate the nature of the mesh-style designs.
    This RDA comes with bottom feeder pin.This item also has many color to choose.
    [​IMG]

    Kindbright Sherman Clone RDA Rebuildable Dripping Atomizer $14.99
    The Kindbright Sherman RDA Clone is constructed from 316 stainless steel in 28mm diameter. It comes with a two-post clamp style build deck and redirected bottom airflow. The RDA is designed for large coils. There is a wide build deck with two large clamp style posts and redirected airflow channels that are raised above the juice well for enhanced flavor production. The RDA features an adjustable bottom airflow control ring and comes with a wide bore 810 drip tip.
    [​IMG]

    Original Kanger KTOGO 2000mAh All in One Starter Kit $30.99
    Kanger KTOGO is the newest starter kit from KangerTech. With Sleek design, this all-in-one device, comes with a tank that has 6ml e-juice capacity, and is powered by build-in 2000mah battery. 5 LED lights indicate battery level and the kit comes with refillable and disposable cartridge. It is a perfect starter kit for beginners.This item also has many color to choose.
    [​IMG]

    Replacement Mesh Heating wire for Taifun BT Atomizer Clone $1.59
    The replacement mesh heating wire is made from stainless steel, with 65mm x 40mm x 0.1mm in dimensions. It is suitable for Taifun BT atomizer Clone.
    This product comes with 2 PCS in one pack.
    [​IMG]

    Cors World Air Bottle Container Clone for 30ml E-juice Bottle $5.99
    The Cors World Air Container Clone is made from aluminum. The outer diameter is 40mm, and the inner diameter is 35mm. It is used to carry one 30ml e-juice bottle and protect it from damage.
    This container is only for carrying one e-juice bottle, do not pour e-juice into it directly.
    [​IMG]

    Replacement Wide Bore Drip Tip for Original Recoil RDA $1.99
    The replacement resin drip tip is in 9mm height, 15m outer diameter and 12mm inner bore diameter. It is suitable for Original Recoil RDA.
    The drip tip will be shipped in random color (one piece).
    [​IMG]

    Original GeekVape 521 Tab Pro Ohm Meter Reader / Resistance Tester $26.99 after add to cart
    Enjoy promotion price by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.Tab Pro is a powerful portable ohm reader platform for enthusiast coil builders. It is a multi-functional device that acts as an ohm meter reader, voltage drop checker, rebuilding station and firing test station. Tab Pro has a rotatable connecter to allow easy access for coil building, testing and usable as a temporary mod.
    [​IMG]

    Original SMOKTech SMOK TFV8 X-Baby V8 Baby X Q2 Coil Head $8.39
    The X-Baby Q2 coils are designed for SMOK TFV8 X-Baby Tank. Q2 is an innovative dual coil with 0.4ohm resistance and supports 40~80W power, bringing you deep and rich cloud taste.
    This product comes with 5 PCS in one pack.This item also has a 0.25ohm version to choose.
    [​IMG]
     
  6. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Sigelei MT Combines 220W TC VW Variable Wattage Mod + Tank Atomizer Kit $43.99
    Sigelei MT Combines, a new powerful member from Sigelei, with two 18650 batteries, supports power output from 10W to 220W. The cool design of fire button is very impressive by two red LED lights on it. It also features a transparent panel for watching the inner part. Stylish and cool design, as well as the powerful output, makes Sigelei MT Combines to be one of the most wonderful TC VW mods in the market.
    [​IMG]
    Original ThinkVape BOX 133 167W DNA 250 TC VW Variable Wattage Box Mod $99.99
    The Original Think Vape BOX 133 167W DNA 250 TC VW Variable Wattage Box Mod is an upgraded version of the BOX 133. It works with 2 x 18650 batteries (not included) and is powered by an authentic Evolv DNA 250 chipset limited to 167W.This item also has many color to choose.
    [​IMG]
    Original ThinkVape Finder 250W DNA250 TC VW Variable Wattage Mod $120.99
    The Original ThinkVape Finder 250 TC VW Variable Wattage Box Mod holds triple 18650 batteries and is powered by authentic Evolv DNA250 chipset. The output wattage can reach from 1W to 250W, extremely powerful. Finder 250 supports multiple working modes, including TC-Ni, TC-Ti, TC-SS, and VW modes.This item also has many color to choose.
    [​IMG]
    Trinity Glass US1 Hybrid Mechanical Mod Clone $14.99
    The Trinity Glass US1 Mechanical Mod Clone is constructed from stainless steel in 24mm diameter. It is a hybrid mod that allows a direct connection to the atomizer. The tube of the mod is contoured, creating a very comfortable feel in your hands. The mod comes with an fully insulated sleeve inside it to separates the battery and the tube, making it safer to use. The fire button contains spring and it is very soft to use.The mod is powered by one single 18650 battery (not included).This item also has many color to choose.
    [​IMG]
    Kindbright Sherman RDA Rebuildable Dripping Atomizer Clone $13.99
    The Kindbright Sherman RDA Clone is constructed from 316 stainless steel in 28mm diameter. It comes with a two-post clamp style build deck and redirected bottom airflow. The RDA is designed for large coils. There is a wide build deck with two large clamp style posts and redirected airflow channels that are raised above the juice well for enhanced flavor production. The RDA features an adjustable bottom airflow control ring and comes with a wide bore 810 drip tip.
    [​IMG]
    Original Sigelei MT Combines 220W TC VW Variable Wattage Mod + Tank Atomizer Kit $69.99
    Sigelei MT Combines, a new powerful member from Sigelei, with two 18650 batteries, supports power output from 10W to 220W. The cool design of fire button is very impressive by two red LED lights on it. It also features a transparent panel for watching the inner part. Stylish and cool design, as well as the powerful output, makes Sigelei MT Combines to be one of the most wonderful TC VW mods in the market.This item also has many color to choose.
    [​IMG]
    Trinity Glass US1 Hybrid Mechanical Mod Clone + Goon 1.5 RDA Clone Kit $22.99
    Mod:
    The Trinity Glass US1 Mechanical Mod Clone is constructed from stainless steel in 24mm diameter. It is a hybrid mod that allows a direct connection to the atomizer. The tube of the mod is contoured, creating a very comfortable feel in your hands. The mod comes with an fully insulated sleeve inside it to separates the battery and the tube, making it safer to use. The fire button contains spring and it is very soft to use.The mod is powered by one single 18650 battery (not included).This item also has many color to choose.
    RDA:
    The Goon 1.5 Style RDA is constructed from stainless steel in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.This item also has many color to choose.
    [​IMG]
    Lucifer Mechanical Mod Clone $22.99
    The Lucifer mechanical mod Clone is constructed from copper in 24mm diameter. It features knurled top hat with 510 threading connection. It comes with magnetic fire button. This mod is powered by one single 18650 battery (not included).This item also has many color to choose.
    [​IMG]
    YFTK Replacement Bottom Feeder Pin for Strike 14 / 18 RDA Atomizer Clone $5.99
    This bottom feeder pin is made from stainless steel. It is suitable for YFTK Strike 14 RDA Rebuildable Dripping Atomizer Clone.
    This product will be shipped with five pieces (5 PCS).This item also has a one piece (1 PC) pack for you to choose.
    [​IMG]
    Kindbright Replacement Tank Sleeve for Reload RTA Clone $1.69
    This replacement tank sleeve is made from glass in 24mm outer diameter. It is suitable for Kindbright Reload RTA atomizer Clone.
    [​IMG]
    Original Vape Geek 510 Hand Spinner Fidget Toy for RDA / RTA / Sub Ohm Tank Atomizer $4.99
    The Original Vape Geek 510 Hand Spinner Fidget Toy is made from stainless steel. It features a 510 connector, hexagonal shape with dice design, and stainless steel bearing. The spinner is installed between the mod and the atomizer. You can play the spinner when you vape, bringing you interesting vape experience.This item also has many color to choose.
    [​IMG]
     
  7. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Aspire Speeder 200W TC VW Variable Wattage Mod $41.99
    The all new, all powerful Aspire Speeder. Bringing a high powered option to the Aspire brand. The Speeder is a compact but heavy duty 200W, TC mod. Dual 18650 high rate batteries power this device that is packed with all the extras that Aspire users come to expect. Auto rotate 0.96 inch OLED screen, continuous fire adjustable, multiple TC / VV / VW / TCR and CPS (Customizable Power Setting) options to nail that vaping sweet spot. You can couple this powerhouse of a mod with your favorite tanks and the vast array of adjustable options on the detailed display will allow for any changes!This item also has many color to choose.
    [​IMG]

    Original Sigelei MT Combines 220W TC VW Variable Wattage Mod $43.99
    Sigelei MT Combines, a new powerful member from Sigelei, with two 18650 batteries, supports power output from 10W to 220W. The cool design of fire button is very impressive by two red LED lights on it. It also features a transparent panel for watching the inner part. Stylish and cool design, as well as the powerful output, makes Sigelei MT Combines to be one of the most wonderful TC VW mods in the market.This item also has many color to choose.
    [​IMG]

    Lucifer Mechanical Mod Clone $19.99
    The Lucifer mechanical mod clone is constructed from copper in 25mm diameter. It features knurled top hat with 510 threading connection. It comes with adjustable center pin. This mod is powered by one single 18650 battery (not included).
    [​IMG]

    Original Marvec Dark Knight Hybrid Mechanical Mod $21.99
    The Original Marvec Dark Knight Mechanical Mod is constructed from brass (mod) and PEI (sleeve) in 24.8mm diameter. It comes 510 hybrid top hat that allows direct contact between battery and atomizer. With inner battery sleeve, the mod is compatible with both 18650 and 20700 battery (battery not included). The fire button comes with spring and silver plated contact, which gives smooth operation and better electric conduction.This item also has many color and material to choose.
    [​IMG]

    Original Luxury Vape Ares Hybrid Mechanical Box Mod $54.99
    The Original Luxury Vape Ares Mechanical Mod is constructed from stabilized wood (mod) and brass (top and bottom part). It comes with 510 hybrid connection and powered by dual 18650 batteries in series connection. The big fire button is positioned on top, right besides the connector. The Ares mod is absolutely eye-catching by its engraved pattern and stylish design.
    This mod will be shipped in random color.
    [​IMG]

    Original Aspire Athos Sub Ohm Tank Atomizer $20.99
    The Athos tank is a new heavy hitter for those who prefer both dense clouds and top-notch flavor. It employs a convenient top-fill, bottom adjustable airflow, as well as the innovative penta-coil head and a tri-coil head to provide you with ultimate flavor and tremendous vapor production. Its parts can be fully disassembled to ensure trouble-free daily use, cleaning and maintenance. The TPD version Athos tank holds 2ml e-liquid.This item also has many color and a standard version to choose.
    [​IMG]

    Original Marvec Dark Knight RDA Rebuildable Dripping Atomizer with BF Pin $9.59
    The Original Marvec Dark Knight RDA is constructed from stainless steel in 24.5mm diameter. The build deck features two posts for single and dual coil, and it is easy to wick coils. The sleeve comes with two air slots on the middle for adjustable airflow. This RDA supports both normal dripping and bottom feeder dripping. Dark Knight RDA does a good job on heat dissipation. The PEI wide bore drip tip and the base insulated plate can greatly reduce much heat. The stylish RDA will surely be a good choice for your vaping.
    This RDA comes with bottom feeder pin.This item also has many material to choose.
    [​IMG]

    Original Armageddon MFG Apocalypse GEN 2 RDA Rebuildable Dripping Atomizer Original price $79.99,Now only $59.99
    The Apocalypse Gen 2 RDA by Armageddon MFG features clamp design, which has a massive space in each clamp which provides space for mounting the most complex and insane coil builds. Coupled with the deep juice well, large build deck, durable post clamps and extended post screws, the Apocalypse is a builder's dream. The unique teardrop shape airflow control provides extra customization and the sleeve has the "APOCALYPSE" logo engraved into one side and the Gas Mask Logo etched on the opposite side.This item also has many color to choose.
    [​IMG]

    Original Aspire Speeder 200W TC VW Variable Wattage Mod + Athos Tank Kit $50.99
    Speeder 200W Kit, is a combination of the latest new high power Speeder mod and Athos tank. The Speeder is a dual bay removable 18650 battery mod which delivers up to 200 watts of power. The kit also comes with a partner tank developed especially to make best use of the power available, the Athos tank. The Athos tank utilizes our innovative penta-coil head to satisfy those who prefer both dense clouds and top-notch flavor. Along with its masses of power, there are also a ton of features that really allow for fine tuning. Wattage range 1~200W, Voltage range 0.1~8.4V, TC range 200~600'F (100~315'C), Further options, TCR, Bypass and CPS can really nail the flavor and vapor from your tanks.This item also has many color to choose.
    [​IMG]

    Original GeekVape Clapton Wire Shots Ni80 + KA1 Heating Wires $2.99
    The Original GeekVape Clapton Wire Shots Heating Wires are made from Kanthal A1 and Nichrome 80 wires. This heating wire comes with 28GA Ni80 + 32GA KA1 gauge. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.
    [​IMG]

    Original Aspire Athos A3 Replacement Coil Heads - 0.3 Ohm (60~75W) $5.49
    The all new innovative Athos coil heads, made for flavor, made for power. These new coil heads will satisfy even the most discerning cloud or flavor chaser. The Tri-coil head is rated at 0.3 ohms and the recommended power setting is 60~75 watts. Truly a power vaper's dream for sub ohm tanks.
    This coil is suitable for Aspire Athos TankThis item also has a 0.16 ohm version to choose.
    [​IMG]

    Original IJOY Captain CA8 Octuple Coil Replacement Coil Heads $8.99
    The Original IJoy Captain CA8 Replacement Coil Heads are high wattage replacement coils designed for maximum flavor and vapor production for the IJoy Captain Sub Ohm Tank. CA8 Octuple coil comes with a resistance of 0.15 ohm and the recommended power range is 60~80W.
    This product comes with 3 PCS in 1 pack and is suitable for IJoy Captain Sub Ohm Tank.This item also has a 0.3 ohm version to choose.
    [​IMG]
     
  8. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Joyetech eVic Primo SE 80W TC VW Variable Wattage Mod $33.99
    Having a large 0.96 inch OLED display and a new easy-to-go interface, the eVic Primo SE is such a compact starter mod that available in multiple attractive colors. It makes no sacrifice to power or functions compared to its predecessors. The eVic Primo SE reaches a formidable 80W power along with a sequence of unique features including 2A quick charge, clock, custom logo and preheat. Spring loaded 510 connector was precisely designed which has a wide coverage for tanks with various pins ranged from 4.0 to 5.5mm. Its simplicity and modesty will surely satisfy you on a daily basis.This item also has many color to choose.
    [​IMG]
    Original XOMO GT Laser 150W 3500mAh Box Mod $66.99
    XOMO GT Laser 150W Box Mod features 0.02s quick fire button, with the built in 3500mAh lithium battery and piano paint processing appearance, is more durable and fashionable. XOMO GT Laser will bring you different vape experience.This item also has many color to choose.
    [​IMG]
    Avid Lyfe Able XL Hybrid Mechanical Mod Smooth Version Clone $18.99
    The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass in 24mm diameter. It features a 510 hybrid top hat for direct connection between battery and atomizer. The top cap and button are knurled. The button features opposite magnets and copper contact pin. The mod is powered by 1 x 18650 battery (not included).
    The mod is smooth version with smooth sleeve.
    [​IMG]
    Avid Lyfe Able XL Hybrid Mechanical Mod Rough version Clone $18.99
    The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass in 24mm diameter. It features a 510 hybrid top hat for direct connection between battery and atomizer. The top cap and button are knurled. The button features opposite magnets and copper contact pin. The mod is powered by 1 x 18650 battery (not included).
    The mod is rough version with rough sleeve.
    [​IMG]
    Battle Master Mechanical Mod Clone with Extended Battery Tube $21.99
    The Battle Master Mechanical Mod Clone is constructed from brass (mod) and POM (sleeve). It comes with an extended battery tube, making it possible to utilize dual 18650 batteries to produce more massive clouds. Single battery works well too. The POM sleeve protects the mod from damage and helps vapers to insulate heat from the mod.This item also has another color to choose.
    [​IMG]
    Original Luxury Vape Ares Wolf Hybrid Mechanical Box Mod $54.99
    The Original Luxury Vape Ares Mechanical Mod is constructed from stabilized wood (mod) and brass (top and bottom part). It comes with 510 hybrid connection and powered by dual 18650 batteries in series connection. The big fire button is positioned on top, right besides the connector. The Ares mod is absolutely eye-catching by its engraved pattern and stylish design.
    This mod will be shipped in random color.
    [​IMG]
    Original Joyetech Procore SE Sub Ohm Tank Atomizer $14.99
    Having a full glass tube with integrated design, the ProCore SE is such a delicate atomizer which is easy to get started. It features a bottom filling and airflow control system. ProC series heads offers a plenty of choices, direct lung or mouth to lung, for massive vapor production and optimal flavor. Meanwhile, it is totally detachable and convenient for cleaning.This item also has many color to choose.
    [​IMG]
    Goon 1.5 RDA Rebuildable Dripping Atomizer Clone $40.99
    The Goon 1.5 RDA Clone is constructed from Mokume Gane in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 wide bore drip tip.
    [​IMG]
    Original Joyetech eVic Primo SE 80W TC VW Variable Wattage Mod + ProCore SE Tank Kit $40.99
    Having a large 0.96 inch OLED display and a new easy-to-go interface, the eVic Primo SE is such a compact starter mod that available in multiple attractive colors. Having a full glass tube with integrated design, the ProCore SE atomizer is such a delicate atomizer which is easy to get started. It features a bottom filling and airflow control system. ProC series heads offers a plenty of choices, direct lung or mouth to lung, for massive vapor production and optimal flavor. The eVic Primo SE reaches a formidable 80W power along with a sequence of unique features including 2A quick charge, real-time clock, custom logo preheat and timeout protection. It's simplicity and modesty will surely satisfy you on a daily basis.This item also has many color to choose.
    [​IMG]
    PVC Wrapper Skin Sticker for 18650 Battery - Dark Vader Pattern (10 PCS) $1.39
    The wrapper sticker is commonly used for 18650 battery, Like LG MH1, LG HB6, Samsung ICR18650-26F, Samsung INR18650 batteries, etc. It comes with Star Wars Dark Vader pattern.
    This product comes with 10 PCS in one pack.This item also has a Pokemon patten to choose.
    [​IMG]
    Replacement Tank Sleeve for SMOK TFV8 Baby Tank $3.99
    The replacement tank sleeve is made from epoxy resin. It measures 22mm in outer diameter and 19.5mm in height. It is suitable for SMOK TFV8 Baby Tank.
    This tank sleeve will be shipped in random color.This item also has many color to choose.
    [​IMG]
    [​IMG]
    Original Nitecore i8 Intellicharger Multi-slot Intelligent Battery Charger - 8 x Battery Slots $50.99
    The Nitecore i8 Intelligent Charger is the latest charger from the reliable Nitecore range, ideal for charging a huge variety of batteries whether used for vaping, torches or other electronic devices. Featuring 8 bays that are controlled independently, the i8 automatically detects power levels of the batteries and selects the appropriate voltage and charging mode. In addition, the charger offers reverse polarity protection and short circuit protection, ensuring you are made aware of the error with a flashing red indicator above the appropriate bay. The Nitecore i8 is made from flame retardant, fire resistant PC materials and has a unique grill design on the top of charger for faster heat dissipation. These features ensure the charger provides a safe, reliable and simple charging experience.
    This charger is UK Plug.This item also has US Plug and EU Plug to choose.
    [​IMG]
     
  9. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Icarus BF Squonk Mechanical Box Mod Clone $27.99
    The Icarus BF Squonk Mechanical Box Mod Clone is constructed from resin with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. It is powered by 1 x 18650 battery (not included) and very easy to use.
    The bottle is made from PE.
    [​IMG]
    Original GeekVape AEGIS 100W Water-proof TC VW Variable Wattage Box Mod $43.99 after add to cart
    Aegis is the newest water-proof box mod from Geekvape. It features water-proof IPX7, which means the Aegis will be able to withstand immersion in the water with one meter depth for up to 30 minutes. It will not cause damage to the mod in the swimming pool, getting caught in the rain, or drifting in river. Aegis houses one 18650 or 26650 battery and the power output can reach to maximum for 100W.This item also has many color to choose.
    [​IMG]
    AV Revolver Timekeeper Time Keeper Mechanical Mod Clone $17.99
    The AV Revolver Timekeeper style stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper style Mod is precision machined with state-of-the-art CNC machines, made out of stainless steel.
    [​IMG]
    AV Able Mechanical Mod Clone $18.99
    The AV Able mechanical mod Clone is made from stainless steel (mod) and carbon fiber (sleeve). It is powered by 18650 battery (not included). The adjustable bottom fire button with opposing earth magnet will be very easy for you to use. Hope this mod will bring you good vaping experience.
    [​IMG]
    AV Lyfe Dimple Hybrid Mechanical Mod Clone $25.99
    The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from aluminum (mod) and brass (top cap and button). The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this mod will bring an amazing vaping experience to your vaping life!This item also has many material to choose.
    [​IMG]
    Mazarin RDA Rebuildable Dripping Atomizer Clone $9.99
    The Mazarin RDA Clone is made from stainless steel in 22mm diameter. The central post is made from 316 stainless steel. It is easy and convenient to build horizontal or vertical coil. The airflow system features dual air slots on the top side for adjustable airflow control. The RDA comes with a POM wide bore drip tip.
    [​IMG]
    Original 528 Custom GOON RDA Rebuildable Dripping Atomizer Original Price $75.99 Now Only $49.99
    The designer of the GOON RDA, Blueeyedgoon83 is well known for their intricate and beautiful builds. The size of the post holes inside the "Bridge Clamp" design are unmatched in the industry allowing for many different and varied builds. This design features a flat surface with another bridge on top of the surface. You can simply put your built coil on the surface and screw down the upper bridge onto the surface, making a connection!

    The GOON RDA features three metallic colors including Copper, Brass and Stainless to match flawlessly with your devices.
    [​IMG]
    Original Envii FITT 650mAh Built-in Battery Mod + Cartridge Starter Kit $37.50
    Envii FITT Starter Kit is a portable pod system device that has dual fire modes, which are draw activated mode and button activated mode. The FITT houses a 650mAh built-in battery and there is an LED light to indicate its battery life. FITT can be simply charged by a USB cable at a maximum 1A rate.
    There is no e-juice pre-filled in the empty cartridge.This item also has 3.2ml and 2.0ml version to choose.
    [​IMG]
    AV Revolver Time Keeper Mechanical Mod Clone + Goon RDA Clone Kit $23.99
    Mod
    The AV Revolver Timekeeper stainless steel mechanical Mod Clone is a hard hitting, competition mechanical 18650 mod. The Timekeeper style Mod is precision machined with state-of-the-art CNC machines, made out of stainless steel.
    RDA:
    The Goon RDA Clone is a 24mm RDA that uses an innovative "bridge clamp" design unrivaled by any other design in the industry. Installing massive and intricate builds or the simplest coils have never been easier with the bridge clamp design of the Goon.
    [​IMG]
    Replacement Wide Bore Drip Tip for Aspire ClEITO EXO Tank $3.99
    The replacement wide bore drip tip is made from resin. The base diameter is 23.6mm in diameter, the mouthpiece is 14mm in diameter, and the height is 17mm in diameter. It is suitable for Aspire CLEITO EXO tank.
    This drip tip will be shipped in random color (one piece).
    [​IMG]
    810 Drip Tip for 528 Goon / Goon LP RDA / Kennedy 24 / 25 RDA / Battle RDA $2.59
    The 810 drip tip is made from resin with 12.5mm diameter 810 connector. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Reload RTA.This item also has many color to choose.
    [​IMG]
    SXK Replacement Cover Panel for BB Box Mod Clone $22.99 after add to cart
    The replacement cover panel is made from PEI, and is designed for SXK BB Box Mod Clone. This cover panel comes with 2 pieces (front and back).
    [​IMG]
    Original Envii Empty Pod Cartridge for FITT Starter Kit $8.49
    The Envii Empty Pod Cartridge is suitable for FITT Starter Kit. It comes with two pieces (2 PCS) in one pack.
    This Cartridge is empty without any e-juice pre-filled in it.This item also has a 4 PCS version to choose.
    [​IMG]
     
  10. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Hidra BF Squonk Mechanical Box Mod Clone $21.99
    The Galactika Hidra BF Squonk Mechanical Box Mod Clone is made from PC and powered by 1 x 18650 battery (not included). The cover panel contains magnet so it will not be loose. The mod has a built-in 8ml dropper bottle for bottom feeder.
    The Negative contact is spring to protect your battery.
    [​IMG]
    Avid Lyfe Able XL Knurled Hybrid Mechanical Mod Clone $18.99
    The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass in 24mm diameter. It features a 510 hybrid top hat for direct connection between battery and atomizer. The whole mod is knurled. The button features opposite magnets and copper contact pin. The mod is powered by 1 x 18650 battery (not included).
    [​IMG]
    Original Yosta Igvi RDA Rebuildable Dripping Atomizer $14.99
    The original Yosta Igvi RDA is constructed from stainless steel in 25mm diameter. The sleeve features six visual windows on the middle side for observing the internal, and ten air holes to adjust airflow, working together with dual air slots on the side of base. The build deck features two posts with four locking holes and deep juice well. It is convenient to build single or dual coil on the deck. The RDA comes with removable 810 drip tip.This item also has many color to choose.
    [​IMG]
    Apocalypse Mechlyfe RDA Rebuildable Dripping Atomizer Clone $7.99
    The Apocalypse Mechlyfe RDA Clone is constructed from stainless steel in 24mm diameter. It features a large build deck for easy coil building, with two post design and oversized bridge clamp. The RDA features dual air slots on the sleeve and teardrop shape slots on the inner side of top cap for adjustable airflow. It comes with a 810 wide bore drip tip.This item also has many color to choose.
    [​IMG]
    Original CoilART DPRO RDA Rebuildable Dripping Atomizer w/ BF Pin $22.99 after add to cart
    Enjoy promotion price ($22.99) by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
    The Stylish DPRO RDA from CoilART is a 24mm diameter RDA with creative postless deck. The length extended airflow system creates awesome flavor. The build deck features 24K gold plated postless deck with 3mm juice well. It is easy for both single coil and dual coil. The Goon style ultem drip tip has inner groove, which can prevent e-juice coming from the bottom to mouth.
    The RDA comes with bottom feeder pin.This item also has many color to choose.
    [​IMG]
    Apocalypse Mechlyfe RDA Rebuildable Dripping Atomizer Clone $8.99
    The Apocalypse Mechlyfe RDA Clone is constructed from stainless steel in 24mm diameter. It features a large build deck for easy coil building, with two post design and oversized bridge clamp. The RDA features dual air slots on the sleeve and teardrop shape slots on the inner side of top cap for adjustable airflow. It comes with a 810 wide bore drip tip.This item also has many color to choose.
    [​IMG]
    Hidra 8ml BF Mechanical Box Mod Clone + Trinity V2 RDA 24mm BF Atomizer Kit Clone $27.99
    Mod:The Galactika Hidra BF Squonk Mechanical Box Mod Clone is made from PC and powered by 1 x 18650 battery (not included). The cover panel contains magnet so it will not be loose. The mod has a built-in 8ml dropper bottle for bottom feeder.
    The Negative contact is spring to protect your battery.
    RDA:
    The Trinity V2 RDA Clone is constructed from 316 stainless steel in 22mm diameter with bottom feeder pin. It is suitable for single coil build and features airflow control from the middle. This RDA comes with a 510 POM drip tip. The top cap is with heat sink design for better heat dissipation.
    The RDA comes with bottom feeder pin.
    [​IMG]
    Original SMOKTech SMOK T-PRIV 220W TC VW Variable Wattage Mod + TFV8 Big Baby Tank Standard Kit $60.99
    Hollow out design of T-PRIV mod shows domineering, the big fire key kindles your desire, adjustable LED meets your various color demands, and 220W output is powered by 2 x 18650 batteries. You can enjoy the excellent performance via the strong V8 Baby-Q2 core and V8 Baby-T8 core of TFV8 Big Baby. Meanwhile it has 5ml capacity and smooth airflow system. T-PRIV kit companies you all the way, just set out to conquer the sea of stars. Innovation keeps changing the vaping experiences.
    Mod:
    The SMOKTech SMOK T-PRIV mod has max output power up to 220W, and provides you two modes (temp mode / watt mode). It is powered by two 18650 batteries in series. The dual battery life indicator on the OLED screen is more accurate for you.
    Tank:
    The SMOK TFV8 Big Baby is a bigger baby beast that let you enjoy more clouds & more freedom & more fun. It adopts the same baby beast engines: V8 Baby-X4 Core, V8 Baby-T6 Core and V8 Baby RBA. Meanwhile, both 5ml bigger e-juice capacity and more vapors will let you enjoy pleasant vaping time.
    [​IMG]
    Original Nitecore SC4 6A Quick Charge Intelligent Superb Charger $40.99
    Nitecore SC4 is the next generation of SC2 charger with 4-slot and LCD screen. The charging current of SC4 Superb Charger is up to 6A in total and maximum charging current up to 3A in s single slot. Using LCD screen with MVA technology to display real-time information of charging status. SC4 automatically detects battery type and capacity, and select the appropriate charging current based on the battery type. Get this intelligent charger for your Li-ion / IMR / liFePO4 / Ni-MH batteries.
    This charger is EU plug. The batteries in the images are not included.This item also has a US plug version to choose.
    [​IMG]
    Original Marvec 810 Drip Tip for 528 Goon / Goon LP / Kennedy 24 / 25 / Battle RDA $3.99
    The original Marvec 810 drip tip is made from resin with 12.5mm diameter 810 connector. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Reload RTA.This item also has another color to choose.
    [​IMG]
     
  11. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    YFTK SVA Kimech BF Squonk Mechanical Mod Clone $44.99
    The YFTK Kimech mechanical mod Clone is made from Nylon and carbon fiber. It features a built in squonk bottle for bottom feeder, with capacity of 7ml. The mod is powered by one single 18650 battery.
    [​IMG]
    Mazarin RDA Rebuildable Dripping Atomizer Clone $9.99
    The Mazarin RDA Clone is made from stainless steel in 22mm diameter. The central post is made from 316 stainless steel. It is easy and convenient to build horizontal or vertical coil. The airflow system features dual air slots on the top side for adjustable airflow control. The RDA comes with a POM wide bore drip tip.
    [​IMG]
    SXK Goon 1.5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $13.99 after add to cart
    The SXK Goon 1.5 RDA Clone is constructed from medical grade 316 stainless steel in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control. The RDA comes with an 810 POM wide bore drip tip.
    This RDA comes with gold plated bottom feeder pin.
    [​IMG]
    Original Wick 'N' Vape Cotton Bacon V2.0 for E-Cigarettes $5.99
    The Original Wick 'N' Vape Cotton Bacon V2.0 is designed with large fibers for low ohm builds and will leave you with minimal dry hits. This cotton provides more capacity and clean pure flavor! Cotton Bacon V2 is as easy as pinch, tear, wick and vape! Cotton Bacon is simply comprised of (Bacon) Strips. Just use the amount you need!
    There comes authentication code on the package.
    [​IMG]
    810 Wide Bore Drip Tip for TFV8 / TFV12 / 528 Goon / Kennedy / Battle RDA $2.99
    The 810 drip tip is made from resin in 18mm overall diameter and 13mm height. The connector is 12.5mm in diameter. It is suitable for SMOK TFV12 tank, TFV8 tank, TFV8 Big Baby Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    This drip tip will be shipped in random color (one piece).
    [​IMG]
    SXK Replacement Tank Cover Plate + O-rings for Billet Box Exocet Mod $2.99
    The replacement glass plate and silicone o-rings are suitable for SXK Billet Box style mod. They are used for the tank of BB style box mod. The glass plate works as a tank door or cover. There comes with two pieces of o-ring, one for the top hole, the other for the bottom hole of the tank.
    [​IMG]
    6-Axis Rudder Shape Spinning Hand Spinner Fidget Toy EDC $8.99
    The 6-axis hand spinner is constructed from brass with a rudder shape. The spinner is pocket-sized and has 3 to 5 minutes spin time with one strike. It is great for people to relieve stress, focus the mind and kill time.
    [​IMG]
    Original SMOKTech SMOK TFV8 Baby Tank V8 Baby-X4 Coil Head $13.99
    The V8 Baby-X4 coil head is suitable for SMOK TFV8 Baby Beast tank atomizer EU edition (2ml). The V8 Baby-X4 core features 0.15 ohm resistance that can support 30~80W power output (best for 40~60W). This SMOK TFV8 Baby coil head will bring you deep and rich cloud taste!
    This product comes with 5 PCS in 1 pack.This item also has many rated parameters for choose.
    [​IMG]
    Original Vapethink Ni80 Nuke Fused Clapton Pre-built Coil Heating Wire $2.95
    The Original Vapethink Ni80 Nuke Fused Clapton Pre-built Coil is made from Nichrome 80 wires and features 0.15 ohm. This pre-coiled heating wire comes with 26GA x 3 + 0.1 x 0.5mm flat coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters for choose.
    [​IMG]
    Original Vapethink Kanthal A1 Satan V4 Pre-built Coil Heating Wire $3.99
    The Original Vapethink Kanthal A1 Satan V4 Pre-built Coil is made from Kanthal A1 wires and features 0.35 ohm. This pre-coiled heating wire comes with 32GA x 28GA + (0.2 x 0.8 Flat + 26GA) coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters for choose.
    [​IMG]
    Original Vapethink KAH A1 Satan V5 Pre-built Coil Heating Wire $3.69
    The Original Vapethink Kanthal A1 Satan V5 Pre-built Coil is made from Kanthal A1 wires and features 0.35 ohm. This pre-coiled heating wire comes with (32GA x 28GA) x 2 + 0.14 x 1.0 (Flat Loose) coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters for choose.
    [​IMG]
    Original VapeThink 316SS Flat Tsuka Clapton Pre-built Coil $5.99
    The Original Vapethink 316 Stainless Steel Flat Tsuka Clapton Pre-built Coil is made from 316 Stainless Steel wires and features 0.3 ohm. This pre-coiled heating wire comes with (0.1 x 0.5mm Flat) + (0.3 x 0.8mm SS316L) coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters for choose.
    [​IMG]
     
  12. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    MMK Hybrid Mechanical Mod Clone $14.99
    The MMK Mechanical Mod Clone is constructed from brass in 24mm diameter. It features all-knurled surface and magnetic fire button. It is powered by 1 x 18650 battery (not included).This item also has many color to choose.
    [​IMG]
    Original Wismec Reuleaux RX GEN3 300W TC VW Variable Wattage Box Mod $45.99
    Reuleaux RX GEN3, the third generation of Reuleaux box mod, is smaller, lighter and more ergonomic than previous versions. Having a big 1.3inch OLED screen and brand-new interface, the GEN3 comes with three replaceable 18650 cells whose maximum output can reach 300W. Moreover, the latest bespoke firmware tailor made for the RX series will make GEN3 always up-to-date. The GNOME atomizer that packs the new WM coils for optimal flavor and retractable top design for easy filling can perfectly pair with GEN3 in terms of appearance and performance.
    [​IMG]
    Original GeekVape AEGIS 100W 4200mAh Water-proof TC VW Variable Wattage Box Mod $76.00
    Aegis is the newest water-proof box mod from Geekvape. It features water-proof IPX7, which means the Aegis will be able to withstand immersion in the water with one meter depth for up to 30 minutes. It will not cause damage to the mod in the swimming pool, getting caught in the rain, or drifting in river. Aegis houses one 18650 or 26650 battery and the power output can reach to maximum for 100W.
    Comes with one 26650 battery (4200mAh)
    [​IMG]
    Original Wismec GNOME Sub Ohm Tank Atomizer $14.99
    Wismec GNOME Sub Ohm Tank feature 25mm diameter and 2ml e-juice capacity and comes with all-new WM coils for huge vapor and optimal flavor. It fits Wismec Reuleaux RX GEN3 Mod perfectly.This item also has many color to choose.
    [​IMG]
    Kindbright Reload Style RTA Rebuildable Tank Atomizer $11.79
    The Kindbright Reload Style RTA is constructed from stainless steel in 24mm diameter. It features post-less deck design for single or dual coil build and gold-plated 510 positive pin. Comes with bottom side adjustable air slots for airflow control, you can enjoy better flavor and cloud. The RDA comes with a wide bore ULTEM drip tip.
    [​IMG]
    Original Wismec Reuleaux RX GEN3 300W TC VW Variable Wattage Box Mod + GNOME Tank Kit $58.99
    Mod:
    Reuleaux RX GEN3, the third generation of Reuleaux box mod, is smaller, lighter and more ergonomic than previous versions. Having a big 1.3inch OLED screen and brand-new interface, the GEN3 comes with three replaceable 18650 cells whose maximum output can reach 300W. Moreover, the latest bespoke firmware tailor made for the RX series will make GEN3 always up-to-date. The GNOME atomizer that packs the new WM coils for optimal flavor and retractable top design for easy filling can perfectly pair with GEN3 in terms of appearance and performance.This item also has many color to choose.
    Tank:
    Wismec GNOME Sub Ohm Tank feature 25mm diameter and 2ml e-juice capacity and comes with all-new WM coils for huge vapor and optimal flavor. It fits Wismec Reuleaux RX GEN3 Mod perfectly.
    [​IMG]
    810 Drip Tip for 528 Goon / Goon LP RDA / Kennedy 24 / 25 RDA / Battle RDA $2.59
    The 810 drip tip is made from resin with 12.5mm diameter 810 connector. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    This drip tip will be shipped in random color (one piece).
    [​IMG]
    Replacement Drip Tip for Taifun BT Tank Atomizer Clone $3.59
    The replacement drip tip is made from resin. It measures 13mm in mouthpiece diameter and 16mm in height. It is suitable for Taifun BT tank atomizer Clone.This item also has many color to choose.
    [​IMG]
    Replacement Extend Cap Tank Sleeve for Aspire Cleito Tank $3.99
    The replacement extend cap tank sleeve is made from Epoxy resin. It measure 22mm in outer diameter, 19mm in inner diameter and 27mm in height. It is suitable for Aspire Cleito tank atomizer.This item also has many color to choose.
    [​IMG]
    YFTK Replacement Sleeve + 510 Drip Tip for Soul S RDA Clone $6.39
    The YFTK replacement sleeve and 510 drip tip are made from PEI. They are suitable for YFTK Soul S Style RDA. The 510 drip tip measures 11.5mm in overall diameter and 13mm in height. The sleeve measures 22mm in outer diameter, 20mm in inner diameter and 18mm in height.
    [​IMG]
    Original Vapjoy Jellyfish Cotton + Ni80 Alien Clapton Coils Kit $14.99
    The Original Vapjoy Jellyfish cotton is specifically manufactured for vaping, selecting the top rank quality natural organic cotton fiber with proprietary purification process to remove impurities, natural oil and pesticides. The Alien Clapton coil is made by pure Nichrome 80 wires. The gauge is 28GA x 4 + 40GA, with resistance of 0.24 ohm.
    This product comes with 2 x pieces of cotton and 10 x Alien Clapton coils.
    [​IMG]
    Original Vapethink Steam Shark Vape Brush + Coil Building Rods for RBA $3.99
    The Original Vapethink Steam Shark Vape Brush with Coil Building Rods Tool is perfect for RBA atomizer. The brush is perfect for RDA Coil. The cleaning tool performs well on cleaning, getting the carbon deposition and greasy dirty things rid of the coil. It is great for healthy vaping. The 5-size coil building rods is suitable for RDA / RBA / RTA rebuildable atomizer. It will bring you a lot of convenience when wicking coils.
    [​IMG]
    Original Vapethink Kanthal A1 Panzer V3 Pre-built Coil Heating Wire $3.59
    The Original Vapethink Kanthal A1 Panzer V3 Pre-built Coil Heating Wire is made from Kanthal A1 wires and features 0.2 ohm. This pre-coiled heating wire comes with 24GA x 3 + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]
    Original Vapethink Ni80 Staple Staggered Flat Clapton Coil Wire $3.59
    The Original Vapethink Ni80 Staple Staggered Flat Clapton Pre-built Coil Heating Wire is made from Ni80 wires and features 0.15 ohm. This pre-coiled heating wire comes with [(0.4 x 0.8mm Flat) + (26GA + 32GA) x 2] + 34GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]
     
  13. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original SMOKTech SMOK Procolor 225W TC VW Variable Wattage Box Mod $49.99
    The ProColor kit comes with the ProColor 225 wattage mod, which has the industrys leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design. The max output power of ProColor can reach up to 225W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing.This item also has many color to choose.
    [​IMG]
    Original IJOY Captain S Sub Ohm Tank Atomizer $22.99
    The IJOY Captain S Sub Ohm Tank features a specially designed groove located below the juice reservoir and right above the coil placement. This result in a reduction in heat transmission route and helps prevent the entire structure from heating up during extended use. And a new thread-less coil system for easy coil replacement. The Captain S sub ohm Tank is conveniently filled via the sliding top cap. Bring you the smoothest airflow and the best flavor!This item also has many color to choose.
    [​IMG]
    Original IJOY Captain RTA Rebuildable Tank Atomizer $23.99
    The IJOY Captain RTA is a very personalized RTA atomizer, with a similar nice appearance of the Captain sub ohm tank, characterized by a diameter of 25mm and a capacity of 3.8ml, innovative postless deck design. Due to the lack of posts frees up build space to accommodate a wide range of coil structures and complex configurations. The quick sliding top fill design makes filling easier, plus by juice flow control, feel full of pleasure with airflow and cloud vapor. What's more, the silicon gasket of fill part can be replaced which increases of service life.This item also has many color to choose.
    [​IMG]
    Original YouDe UD Bellus V2 RDTA Rebuildable Dripping Tank Atomizer $29.99
    Base on the YouDe UD Bellus RTA, the Authentic YouDe UD Bellus V2 RDTA is a combination of RDA and RTA. It features 5ml e-juice capacity and innovative spiral airflow design, bringing you pure flavor and joyful vaping experience. The base features two posts design and 18mm wide build deck, making it easy to build single or dual coils.This item also has many color to choose.
    [​IMG]
    Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $20.99
    The Kennedy V5 RDA Clone is constructed from titanium in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough space for building coils more easily.
    This RDA comes with bottom feeder pin.This item also has another material to choose.
    [​IMG]
    Original SMOKTech SMOK Procolor 225W TC VW Variable Wattage Mod + TFV8 Big Baby Tank Kit $65.99
    The ProColor kit comes with the ProColor 225 wattage mod, which has the industrys leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design, and the included sub ohm tank is the world famous and beloved TFV8 big baby tank. All of these features will show you perfect self, innovation keeps changing the vaping experience!
    This mod kit is EU edition with 2ml TFV8 Big Baby Tank.This item also has many color to choose.
    [​IMG]
    Original SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mods $6.99
    The Original SJMY Bottom Feeder Bottle is made from food grade silicone and the top cap is made from stainless steel. It feels super soft and smooth. The bottle holds about 6ml of e-juice and it is universal suitable for BF squonk mods in the market.This item also has many color to choose.
    [​IMG]
    Original Aweite AWT 26650 4500mAh 3.7V 75A High Drain Rechargeable Battery $19.99
    The Original Aweite AWT 26650 Battery, featuring a diameter of 26mm and a length of 65mm, has a 4500mAh large battery capacity with 75A max continuous discharging current. Long storage life and high energy density.
    This product comes with two (2) pieces in one pack.
    [​IMG]
     
  14. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Swiss Hybrid Mechanical Mod Clone $19.99
    The Swiss Mechanical Modd Clone is made from aluminum and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. It comes with spring bottom fir button.
    This mechanical mod is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
    [​IMG]
    AV Lyfe Dimple Hybrid Mechanical Mod Clone $19.99
    The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from aluminum. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this mod will bring an amazing vaping experience to your vaping life!
    This mechanical mod is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
    [​IMG]
    Original SOOMOOK FF91 200W TC VW Variable Wattage Box Mod $35.99
    Original SOOMOOK FF91 TC VW Mod is a powerful temperature controal variable wattage mod. Powered by 2 x 18650 battery (not included), SOOMOOK FF91 can reach for maximum 200W. With 0.96" OLED display screen, you can know all vaping data clearly. Working modes includes TC-Ni, TC-Ti, TC-SS, Power, Bypass mode. It would be a good choice for your joyful vaping.This item also has many color to choose.
    [​IMG]
    Complyfe Battle RDA Rebuildable Dripping Atomizer Clone $7.95
    The Complyfe Battle RDA Clone is constructed from aluminum (drip tip and sleeve) and stainless steel (base). It is 24mm in diameter with 510 connector. It features two posts deck for coil building and side airflow control. The RDA comes with a removable wide bore drip tip.
    This RDA is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
    [​IMG]
    Complyfe Battle X RDA Rebuildable Dripping Atomizer Clone $7.95
    The Complyfe Battle X RDA Clone is constructed from aluminum (drip tip and sleeve) and stainless steel (base). It is 24mm in diameter with 510 connector. It features two posts deck for coil building and side airflow control. The RDA comes with a removable wide bore drip tip.
    This RDA is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
    [​IMG]
    Original Wotofo Freakshow V2 RDA Rebuildable Dripping Atomizer $18.99
    The Original Wotofo Freakshow RDA V2 25mm is following on in the footsteps of the original Freakshow. The V2 Still retains the awesome under coil airflow that the original freakshow had but now with the addition of added side airflow if needed. The deck has also changed to a dual-post Velocity style deck ideal for dual coil setups. So the Freakshow V2 RDA is very capable of satisfying both flavor chasers and cloud chasers.
    [​IMG]
    Original Asvape AIM-9 RDA Rebuildable Dripping Atomizer $35.00
    Original Asvape AIM-9 RDA is a 24mm diameter dripper with classic original column structure. Constructed from stainless steel, AIM-9 features dual-post design, PEEK insulator, and bottom adjustable airflow with fine-tuned, angled airflow channels for the leak resistance. The RDA comes with a wide bore drip tip.This item also has many color to choose.
    [​IMG]
    Original Advken Manta RTA Rebuildable Tank Atomizer $27.99 after add to cart
    Introducing the new RTA from Advken, the Manta RTA is a 24mm diameter tank with 4.5ml capacity (3ml with spare tank sleeve). The special two-post design can be compatible with different types of wires. It also features convenient top filling, gold plated posts, and bottom adjustable airflow. Manta RTA comes with a PEI 810 wide bore drip tip.
    [​IMG]
    SXK E-Phenix Resurrection V2 RDA Rebuildable Dripping Atomizer Clone $12.99 after add to cart
    The SXK E-Phenix Resurrection V2 RDA Clone is constructed from 316 stainless steel in 22.5mm diameter. It is mini sized but can provide rich flavor. It features gold plated deck with triple posts. It comes with removable wide bore drip tip.
    The RDA comes with bottom feeder pin.This item also has double posts version to choose.
    [​IMG]
     
  15. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Asvape Strider 75W TC VW Variable Wattage Box Mod - Random Color, Stable Wood $250.00
    The Original Asvape Strider 75W Box Mod adopts the latest American VO 75 chip, supports power output from 5W to 75W. Strider supports variable power curve (VPC), Power, TC and BYPASS modes. The Mod is powered by one 26650 or 18650 battery (with battery adapter), which is very flexible for your vaping.
    This mod will be shipped in random color. More options than what's on the image.
    [​IMG]

    Original Joyetech Cuboid Pro 200W TC VW Varible Wattage Box Mod + ProCore Aries Tank Kit $73.99
    Introducing the most advanced and powerful box mod with a large 2.4 inch TFT color display. Featuring an easy-to-access menu system on a fully responsive touch screen, the CUBOID Pro presents all the vaping essentials as well as some unique cool features like changeable wallpaper, pedometer, preheat, reverse charging and over time protection. Powered by dual 18650 batteries (not included), the CUBOID Pro applies a sophisticated temperature control suite coupled with a 200W maximum output.This item also has many color to choose.
    [​IMG]

    Cutthroat Edition Consvr Hybrid Mechanical Mod Clone $19.99
    The Cutthroat Edition Consvr Mechanical Mod Clone is constructed from brass in 25mm diameter. It features 510 hybrid top cap, hourglass groove, rare earth magnet button and unique floating ball contact pin. It is powered by 1 x b18650 battery (not included).This item also has many color to choose.
    [​IMG]

    Original Asvape Strider 75W TC VW Variable Wattage Box Mod $118.00
    The Original Asvape Strider 75W Box Mod adopts the latest American VO 75 chip, supports power output from 5W to 75W. Strider supports variable power curve (VPC), Power, TC and BYPASS modes. The Mod is powered by one 26650 or 18650 battery (with battery adapter), which is very flexible for your vaping.
    This mod will be shipped in random color. More options than what's on the image.This item also has many color to choose.
    [​IMG]

    Apocalypse Mechlyfe RDA Clone Rebuildable Dripping Atomizer w/ BF Pin $7.99
    The Apocalypse Mechlyfe RDA Clone is constructed from stainless steel in 24mm diameter. It features a large build deck for easy coil building, with two post design and oversized bridge clamp. The RDA features dual air slots on the sleeve and teardrop shape slots on the inner side of top cap for adjustable airflow. It comes with a 810 wide bore drip tip.
    This RDA comes with bottom feeder pin.This item also has many color to choose.
    [​IMG]

    Original Oumier Maximus Max RDTA Rebuildable Dripping Tank Atomizer $20.79
    The 24mm Maximus Max RDTA features an innovative square liquid guiding hole pairing with top central hole filling, a precise airflow design for three different adjusting modes, a large post deck for single or dual coil building, a 3ml Juice capacity with wide wicking area and deep saturation. All parts are detachable and with the maximum convenient in coil building. Comes with a PEI drip tip (suitable for 810 drip tip) with excellent heat insulation.
    [​IMG]

    Original Joyetech Cuboid Pro 200W TC VW Varible Wattage Box Mod + ProCore Aries Tank Kit $90.99
    Introducing the most advanced and powerful box mod with a large 2.4 inch TFT color display. Featuring an easy-to-access menu system on a fully responsive touch screen, the CUBOID Pro presents all the vaping essentials as well as some unique cool features like changeable wallpaper, pedometer, preheat, reverse charging and over time protection. The ProCore Aries atomizer has an innovative flip-to-open top-fill system, allowing to refill the e-juice with great ease. ProC series heads provides plenty of options, from mouth to lung inhale to direct lung inhale, from massive vapor production to optimal flavor. Powered by dual 18650 batteries (not included), the CUBOID Pro applies a sophisticated temperature control suite coupled with a 200W maximum output.This item also has many color to choose.
    [​IMG]
     
  16. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    AV Able XL Hybrid Mechanical Mod Clone $17.99
    The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass (mod) and Carbon fiber (sleeve) in 24mm diameter. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod is powered by 1 x 18650 battery (not included).This item also has many color and materials to choose.
    [​IMG]
    Original Wotofo Freakshow V2 RDA Rebuildable Dripping Atomizer $18.99
    The Original Wotofo Freakshow RDA V2 25mm is following on in the footsteps of the original Freakshow. The V2 Still retains the awesome under coil airflow that the original freakshow had but now with the addition of added side airflow if needed. The deck has also changed to a dual-post Velocity style deck ideal for dual coil setups. So the Freakshow V2 RDA is very capable of satisfying both flavor chasers and cloud chasers.
    [​IMG]
    Limitless Hextron RTA Rebuildable Tank Atomizer Clone $11.99
    The Limitless Hextron RTA Rebuildable Tank Atomizer Clone is constructed from stainless steel in 24mm diameter. The glass tank can hold 2.8ml e-juice. It features threaded chuf cap for top fill access and adjustable bottom airflow control system. The RTA comes with 0.5ohm coil with integrated bottom airflow.This item also has many color to choose.
    [​IMG]
    Original Hcigar VT Inbox 75W TC VW Varible Wattage Box Mod + Maze V1.1 22mm RDA $79.99
    Mod:
    The Original Hcigar VT Inbox 75W TC VW Box Mod is powered by Evolv DNA75 chip from USA, making it easy to operate and the maximum output can reach to 75W. Using single high-rate 18650 battery, it can be charged directly via USB or replacing the battery to achieve duration. The USB port is not only for charging, but also for connecting to computer to customize through Escribe software. VT Inbox is also squonk-friendly with inner 8ml bottom feeder bottle.This item also has many color,pattern and materials to choose.
    RDA:
    The Maze V1.1 RDA is a 22mm diameter atomizer with double types of adjustable airflow. The small holes on the top cap inlet the air and through convection circulation make the fog softer. The wide slots on the bottom side make the fog stronger. It also features two posts velocity style build deck for single or dual coils.
    [​IMG]
    Complyfe Bolt Mechanical Mod Clone + Battle RDA Kit Clone $21.99
    Mod:
    The Bolt Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It comes with 5 vent holes on the top side and magnetic bottom firing button.This item also has many color to choose.

    RDA:
    The Battle RDA Clone is constructed from aluminum cap and stainless steel deck. The Battle style RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Battle style RDA is a good choice for cloud chasing enthusiasts!
    [​IMG]
    Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV8 Big Baby Tank $5.99
    The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV8 Big Baby tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV8 Big Baby tank and make it different.
    The tank on the image is not included, for display only.This item also has many color to choose.
    [​IMG]
    Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV8 Tank $5.99
    The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV8 tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV8 tank and make it different.
    The tank on the image is not included, for display only.This item also has many color to choose.
    [​IMG]
    Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV12 Tank $5.99
    The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV12 tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV12 tank and make it different.
    The tank on the image is not included, for display only.This item also has many color to choose.
    [​IMG]
    Battle Multi-functional Carrying Storage Bag Clone for E-cigarette $8.99
    The Battle Multi-functional Carrying Storage Bag Clone is a bag for you to carry vaping devices or DIY tools on the go. This durable, practical, portable bag is a good choice for all vapors.
    The mod kit on the image is not included, for display only.This item also has many color to choose.
    [​IMG]
    510 Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $3.99
    The 510 drip tip is made from PEEK material. It measures about 11mm in outer diameter and 13mm in height. The inner diameter is about 0.3mm. It is great for tasting denser flavor.
    [​IMG]
     
  17. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Eleaf iKunn i200 200W 4600mAh TC VW Variable Wattage Box Mod $32.79
    The Eleaf iKuun i200 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). Powered by an internal battery, this e-cigarette box mod is capable of outputting a max power of 200 watts, allowing a great vaping experience with huge vapor production. It also comes with a big 0.96 inch screen that offers an all-new concise interface and has 2A quick charge capacity.This item also has many color and rated parameters to choose.
    [​IMG]

    Original Eleaf iKunn i80 80W 3000mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit $30.99
    The Eleaf iKuun i80 features an innovative temperature protection system of charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). This compact e-cigarette box mod skillfully packs a big 0.91 inch screen with an internal sustainable 3000mAh battery in a unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging.This item also has many color and rated parameters to choose.
    [​IMG]

    Original Eleaf MELO 4 Sub Ohm Tank Atomizer $14.99
    The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has many color and rated parameters to choose.
    [​IMG]

    Original Eleaf iKunn i80 80W 3000mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit $40.69
    Mod:
    The Eleaf iKuun i80 features an innovative temperature protection system of charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). This compact e-cigarette box mod skillfully packs a big 0.91 inch screen with an internal sustainable 3000mAh battery in a unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging.This item also has many color and rated parameters to choose.

    Tank:
    The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has rated parameters to choose.
    [​IMG]

    Original Eleaf iKunn i200 200W 4600mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit $42.69
    Mod:
    The Eleaf iKuun i200 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). Powered by an internal battery, this e-cigarette box mod is capable of outputting a max power of 200 watts, allowing a great vaping experience with huge vapor production. It also comes with a big 0.96 inch screen that offers an all-new concise interface and has 2A quick charge capacity.This item also has many color to choose.

    Tank:
    The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has many rated parameters to choose.
    [​IMG]

    Metal Moose Clasick Mechanical Mod Clone + Battle Style RDA Clone Kit $22.99
    Mod:
    The Metal Moose Clasick Mechanical Mod Clone is constructed from brass in 24mm diameter. It features simple but classic appearance, and is powered by 1 x 18650 battery. Hope this mechanical mod can bring you unique vaping experience.This item also has many color to choose.

    RDA:
    The Battle RDA Clone is constructed from brass cap and stainless steel deck. The Battle style RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Battle style RDA is a good choice for cloud chasing enthusiasts!This item also has many rated parameters to choose.
    [​IMG]

    Original Sigelei Laisimo A.L ASHKANDI Mechanical Mod + RDA Kit $39.99
    Original Sigelei Laisimo A.L ASHKANDI Mechanical Mod Tricker Kit includes a billet-brass-construction mech mod and a 25mm RDA. The A.L ASHKANDI mod features multicolor resin coating and magnetic fire button. The RDA features 24K gold plated deck and adjustable airflow. A.L is a great choice for cloud chaser and those who want to vape tricks.This item also has many color and rated parameters to choose.
    [​IMG]

    Original Vapethink Sweep V1 Ni80 Pre-built Coil Heating Wire $4.99
    The Original Vapethink Sweep V1 Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.2 ohm. This pre-coiled heating wire comes with 26GA x 3 + 38GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]

    Original Vapethink Sweep V2 Ni80 Pre-built Coil Heating Wire $4.99
    The Original Vapethink Sweep V2 Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.2 ohm. This pre-coiled heating wire comes with 28GA x 4 + 38GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]

    Original Vapethink Prado Kanthal A1 Pre-built Coil Heating Wire $4.59
    The Original Vapethink Prado Pre-built Coil Heating Wire is made from Kanthal A1 wires and features 0.25 ohm. This pre-coiled heating wire comes with 0.3 x 0.8mm Flat x 3 + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]

    Original Vapethink Staggered Chain SS316L Pre-built Coil Heating Wire $6.59
    The Original Vapethink Staggered Chain Pre-built Coil Heating Wire is made from SS316L wires and features 0.25 ohm. This pre-coiled heating wire comes with 26GA x 32GA x 2 + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]

    Original Vapethink Trident Kanthal A1 Coil Heating Wire $7.99
    The Original Vapethink Trident Pre-built Coil Heating Wire is made from Kanthal A1 wires and features 0.25 ohm. This pre-coiled heating wire comes with 2 x (28GA x 38GA) x 2 + 24GA x 2 x 32GA + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
    [​IMG]

    YFTK Replacement Sleeve + 510 Drip Tip for Soul S RDA Clone $6.99
    The YFTK replacement sleeve and 510 drip tip are made from PEI. They are suitable for YFTK Soul S RDA Clone. The 510 drip tip measures 11.5mm in overall diameter and 13mm in height. The sleeve measures 22mm in outer diameter, 20mm in inner diameter and 18mm in height.
    [​IMG]
     
  18. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Modefine Prism 250W TC VW Variable Wattage Box Mod $45.00
    The Original Modefine Prism 250W TC VW Mod is a temperature control and variable wattage mod with stylish pentagonal prism shape. Powered by triple 18650 high drain batteries, the output power of Prism can reach up to 250 watts. The temperature range is 100~315'C / 200~600'F. It also features a large OLED screen and big fire button. The Modefine Prism 250W mod will be a great choice for your vaping.This item also has many color to choose.
    [​IMG]
    Original IJOY Captain PD1865 225W TC VW Variable Wattage Box Mod $55.99
    The Original Captain PD1865 Box Mod is a high quality temperature control and variable wattage mod. Powered by dual 18650 batteries, the output power can reach up to 225 watts. Captain PD1865 comes with comprehensive temperature control mode and effective fine-tuning settings. Compact size with no overhanging with 30mm atomizers, Captain PD1865 will bring you nice flavor and clouds production.This item also has many color to choose.
    [​IMG]
    Original Wotofo RAM Bottom Feeder Squonk Mechanical Box Mod $68.99
    The Ram Box Mod by Stentorian and Wotofo is one of the first affordable bottom feeder squonk mods on the market. It features an elegant design and comes with 7ml squonk bottle. The Ram Squonker Box Mod has a fire button with a safety lock on to prevent accidental discharge.This item also has many color to choose.
    [​IMG]
    Original Steel Vape Phoenix Bottom Feeder Squonk Mechanical Box Mod $30.99
    The Original Steel Vape Phoenix Box Mod is a bottom feeder squonk mechanical box mod with 6.8ml squonk bottle. It is powered by one single 20700 battery. The box cover can be attached by magnets. The cover has a vent holes on it for observing how much juice remains.
    [​IMG]
    Cutthroat Edition Consvr Hybrid Mechanical Mod Clone $18.99
    The Cutthroat Edition Consvr Mechanical Mod Clone is constructed from brass in 25mm diameter. It features 510 hybrid top cap, hourglass groove, rare earth magnet button and unique floating ball contact pin. It is powered by 1 x b18650 battery (not included).This item also has many color to choose.
    [​IMG]
    Icarus 1.5 BF Squonk Mechanical Box Mod Clone $23.99
    The Icarus 1.5 BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use.
    The connector of the fire button is improved and a silver ring is added to the 510 connector, this will increase the contact area to decrease spark as firing. Please check the pictures.
    [​IMG]
    Icarus 1.5 BF Squonk Mechanical Box Mod Clone with Extra Orange Front + Back Cover Plates $30.99
    The Icarus 1.5 BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use.
    The connector of the fire button is improved and a silver ring is added to the 510 connector, this will increase the contact area to decrease spark as firing. Please check the pictures
    This product comes with one black mechanical mod (with black cover plates), and two extra orange cover plates (1 x front plate, 1 x back plate).
    [​IMG]
    SXK Taifun GS RTA Rebuildable Tank Atomizer Clone Original Price $9.99,Now Only $7.99
    The SXK Taifun GS Style RTA Clone is constructed from stainless steel and PMMA material in 17mm diameter. It features top filling design and can hold about 2.7ml e-juice. The deck features two posts for single coil building. Taifun GS also features bottom adjsutable airflow. It comes with a small bore long drip tip for dense flavor.
    [​IMG]
    Original Oumier Wasp Nano RDA Rebuildable Dripping Atomizer with BF Pin $11.99
    The Original Oumier Wasp Nano RDA is constructed from stainless steel (base) and PC (sleeve) in 22mm diameter. The RDA features large build deck and unique coil-locking design for single coil build. It has direct side airflow design to ensure fabulous vaping experience.
    This RDA comes with bottom feeder pin.
    [​IMG]
    Chalice IV RDA Rebuildable Dripping Atomizer Clone $10.59
    The Chalice IV RDA Clone is constructed from stainless steel in 18mm diameter. It features a two-post build deck for dual coil build and adjustable airflow control. The RDA comes with a removable 510 drip tip.
    [​IMG]
    810 Wide Bore Drip Tip for 528 Goon / Goon LP / Kennedy 24 / 25 / Battle RDA $3.99
    The 810 Drip Tip is made from Titanium in 12mm height. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    [​IMG]
    Replacement Squonk Bottle for Hidra BF Mechanical Box Mod Clone $1.39
    The Replacement Dropper Bottle is designed for Hidra BF Mechanical Box Mod Clone. It is made from PC material and can hold 8ml e-juice.
    [​IMG]
    YFTK Replacement Tank Sleeve + Drip Tip for SOLO RDA $6.49
    The YFTK Replacement top cap and Drip Tip is made from PEI and suitable for SOLO RDA.
    [​IMG]
    YFTK Replacement Tank Sleeve + Drip Tip for SOLO RDA $9.99
    The YFTK Replacement top cap and Drip Tip is made from PEEK and suitable for SOLO RDA.
    [​IMG]
    YFTK SOLO RDA Rebuildable Dripping Atomizer with BF Pin $18.99
    The YFTK SOLO RDA Rebuildable Dripping Atomizer is constructed from 316 stainless steel and PEEK. The RDA is in 22mm diameter and comes with bottom feeder Pin for squonk mod.
    [​IMG]
     
  19. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    Original Smoant Battlestar MU 200W TC VW Variable Wattage Box Mod $129.99
    The Original Smoant Battlestar MU 200W TC VW Box Mod is a full stable wood chassis version of the standard Battlestar. The Smoant features a curved and ergonomic design intended to fit comfortably within the user's hand during use. With dual 18650 batteries, the output range can vary from 1 to 200W, with support for atomizers down to 0.1 ohms. The temperature control mode supports Ni200 Nickel, Titanium, and 304 / 316 / 317 Stainless Steels.This item also has many color to choose.
    [​IMG]
    The Predator Hybrid Mechanical Mod Clone $17.99
    The Predator Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
    [​IMG]
    The Swiss Hybrid Mechanical Mod Clone $17.99
    The Swiss Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.This item also has another color to choose.
    [​IMG]
    The Double Cross Hybrid Mechanical Mod Clone $17.99
    The Double Cross Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.This item also has another color to choose.
    [​IMG]
    AV Lyfe Dimple Hybrid Mechanical Mod Clone $17.99
    The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from brass. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
    [​IMG]
    Complyfe Vortex Mechanical Mod Clone $17.99
    The Complyfe Vortex Mechanical Mod Clone is constructed from brass powered by 1 x 18650 battery. Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
    [​IMG]
    The Stealth Hybrid Mechanical Mod Clone $17.99
    The Stealth Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
    [​IMG]
    Original SMOKTech SMOK G150 150W 4200mAh TC VW Variable Wattage Box Mod $44.99
    The Original SMOKTech SMOK G150 Mod comes with built-in 4200mAh battery and the maximum output wattage can reach to 150W. In VW mode, the resistance range is 0.1~3.0ohm, while in TC mode, it is 0.06~3.0ohm. With a large OLED display, it is quite easy to read all vaping information. G150 has multiple protections, such as short circuit protection, over-heating protection, low-battery warning, intelligent atomizer recognition, puff monitoring system, 12 seconds cut-off.This item also has many color to choose.
    [​IMG]
    Original Desire Mad Dog GTA Rebuildable Tank Atomizer $31.99
    After the success of Mad Dog RDA, Mad Dog RDTA, Desire brings another great atomizer to us, the Mad Dog GTA (Genesis Tank Atomizer). It features 24mm diameter and large tank capacity, as well as bottom airflow system with two air slots. Mad Dog GTA comes with a wide bore drip tip.This item also has many color to choose.
    [​IMG]
    Original Hellvape Dead Rabbit RDA Rebuildable Dripping Atomizer w/ BF Pin $34.90
    The Original Hellvape Dead Rabbit RDA is a 24mm diameter RDA with ample build space and generous post holes. The slide in top coil deck takes the guesswork out of pre cutting your coil leads. It comes with adjustable top side diagonal airflow to create massive flavor and to minimize leaking. The protruding 510 pin and peek insulation makes it really friendly to mechanical mods.
    This RDA comes with bottom feeder pin.This item also has many color to choose.
    [​IMG]
    SXK Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.99 after add to cart
    The SXK Soul S RDA Clone is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual middle air slots for adjustable airflow control.
    This RDA comes with bottom feeder pin.
    [​IMG]
    SXK Skyline RTA Rebuildable Tank Atomizer Clone $19.90
    The SXK Skyline RTA Clone is constructed from 316 stainless steel in 22mm diameter with 4ml capacity. It comes with "AirDisks" in order to satisfy the air supply for every taste for M2L as well as directly to the lungs in full. This allows the single-coil-atomizer to produce any desired vape experience depending on the daytime and mood. In the Skyline style RTA you can also find the refill opening under the unscrewable top cap. A special feature is immediately apparent. The drip tip has a hexagonal connection at the bottom, which fits into the corresponding counterpart of the chimney. This controls the liquid flow.
    [​IMG]
    The Predator Hybrid Mechanical Mod Clone + AV RDA Clone Kit $23.99
    Mod:
    The Predator Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.

    RDA:
    The AV RDA Clone is made from brass in 24mm diameter. It features integrated sleeve with drip tip and bottom adjustable airflow. The build deck features two posts for single coil.
    [​IMG]
    The Swiss Hybrid Mechanical Mod Clone + Battle RDA Kit Clone $23.99
    Mod:
    The Swiss Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
    RDA:
    The Complyfe Battle RDA Clone is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip. It features triple posts design and adjustable airflow.
    [​IMG]
     
  20. 3FVAPE

    3FVAPE Senior Member VCA Approved Vendor

    Joined:
    Jul 24, 2015
    The Double Cross Hybrid Mechanical Mod Clone + Battle RDA Clone Kit $23.99
    Mod:
    The Double Cross Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
    RDA:
    The Complyfe Battle RDA Clone is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip. It features triple posts design and adjustable airflow.
    [​IMG]
    AV Lyfe Dimple Hybrid Mechanical Mod Clone + Battle RDA Clone Kit $23.99
    Mod:
    The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from brass. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
    RDA:
    The Complyfe Battle RDA Clone is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
    [​IMG]
    Complyfe Vortex Mechanical Mod Clone + Battle RDA Clone Kit $23.99
    Mod:The Complyfe Vortex Style Mechanical Mod is constructed from brass powered by 1 x 18650 battery. Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
    RDA:
    The Complyfe Battle style RDA is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
    [​IMG]
    The Stealth Hybrid Mechanical Mod Clone + Battle RDA Clone Kit $23.99
    Mod:The Stealth Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
    RDA:
    The Complyfe Battle RDA Clone is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
    [​IMG]
    Original BeFire 3.7V 40A 3000mAh 18650 High Drain Rechargeable Battery $9.99
    The Original BeFire 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 3000mAh large battery capacity with 40A max continuous discharging current. Long storage life and high energy density.
    This product comes with two (2) pieces in one pack.
    [​IMG]
    Original Asvape Ni80 Clapton Pre-built Coil Heating Wire $9.99
    The Original Asvape Clapton Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.3 ohm. This heating wire will be a good vaping choice for DIY.
    This product comes with 5 packs in 1 box, each pack has 2 piece of coils, totally 10 piece of coils.
    [​IMG]
    Original Asvape Clapton Pre-built Coil Heating Wire + Cotton Kit $8.99
    The Original Asvape Cotton is 100% natural organic cotton, which is highly absorbent and tasteless. The Authentic Asvape Clapton Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.3 ohm. This heating wire will be a good vaping choice for DIY.
    This product comes with 1 pack of cotton and 1 coil pack (with 2 PCS coils in it).
    [​IMG]
    SXK Replacement Sleeve for Soul S RDA Clone $4.00
    The SXK Replacement Sleeve is made from PEI, with 22mm in diameter and 18mm in height. It is suitable for SXK Soul S RDA Clone.
    [​IMG]
     

Share This Page